<tt id="l2zj0"></tt>
    1. 网站标志
      产品详情
       
      产品详情
      TH-3002 Gagemaker



      TH-3000-RSC External Thread Height, 0-50-0, Tool Joint 
      TH-3000-RSC-1 External Thread Height, 0-10-0, Tool Joint , .0001" Res. Indicator
      TH-3000-USS USS Improved Buttress External Thread Height Gage with balanced dial and T500C-USS
      TH-3001R External Thread Height, 0-100, 8-Round (T501)
      TH-3001R-1 External Thread Height, 0-10-0, 8-Round (T501), .0001" Res. Indicator
      TH-3001V External Thread Depth/Height gage, 0-100, UN, ACME, Stub ACME, Line Pipe (.196 travel), (Same as TH-3001PD)
      TH-3001V-1 External Thread Depth/Height gage, 0-10-0, UN, ACME, Stub ACME, Line Pipe (.196 travel), .0001" Res. Indicator
      TH-3002B External Thread Height Gage, 0-25-0, ?” TPF Buttress (T072)
      TH-3002B-1 External Thread Height Gage, 0-10-0, ?” TPF Buttress (T072), .0001" Res. Indicator
      TH-3002BB External Thread Height Base Only, ?” TPF Buttress
      TH-3002R External Thread Height Gage, 0-50-0, 8-Round (T501)
      TH-3002R-1 External Thread Height Gage, 0-10-0, 8-Round (T501), .0001" Res. Indicator
      TH-3002RB External Thread Height Base Only, 8-Round (T501)
      TH-3002S External Thread Addendum (Shave) Gage, 0-50-0, 8 Round (T072), .196” Travel, 3.230” Min. Bore. 
      TH-3002S External Thread Addendum (Shave) Gage, 0-25-0, 8-Round (T072), 1014S Standard required
      TH-3002S-1 External Thread Addendum (Shave Gage), 0-10-0, 8-Round (T072), .0001" Res. Indicator, 1014S Standard required
      TH-3002V External Thread Height Gage, 0-50-0, Line Pipe/Tool Joint
      TH-3002V-1 External Thread Height Gage, 0-10-0, Line Pipe/Tool Joint, .0001" Res. Indicator
      TH-3002VB External Thread Height Base Only, Line Pipe/Tool Joint
      TH-3003B External Thread Height Gage, 0-25-0, Step Base, 1” Buttress
      TH-3003B-1 External Thread Height Gage, 0-10-0, Step Base, 1” Buttress, .0001" Res. Indicator
      TH-3003BB External Thread Height Base Only, 1” Buttress
      TH-3004 Internal Thread Height Gage, 0-25-0, .0005, Line Pipe 
      TH-3004-1 Internal Thread Height Gage, 0-10-0, .0001, Line Pipe, .0001" Res. Indicator
      TH-3004DD Doug Dunford Special Clip Gage
      TH-3004DD-1 Doug Dunford Special Clip Gage, .0001" Res. Indicator
      TH-3006 Internal Thread Height Gage, 0-25-0, .0005, 8-Round  
      TH-3006-1 Internal Thread Height Gage, 0-10-0, 8-Round, .0001" Res. Indicator
      TH-3008 Internal Thread Height Gage, 0-25-0, 8-Round  
      TH-3008-1 Internal Thread Height Gage, 0-10-0, 8-Round, .0001" Res. Indicator
      TH-3009 Internal Thread Height/Depth Gage, 0-25-0, ?” TPF Buttress (T072) UN, ACME, Stub ACME (.250 travel), (Same as aTH-3009PD)
      TH-3009-1 Internal Thread Height/Depth Gage, 0-10-0, ?” TPF Buttress (T072) UN, ACME, Stub ACME (.250 travel), .0001" Res. Indicator
      TH-3009-RSC Internal Thread Height/Depth Gage, 0-25-0, 1” Base Length, Rotary Shouldered Connections 
      TH-3009-RSC-1 Internal Thread Height/Depth Gage, 0-10-0, Rotary Shouldered Connections, .0001" Res. Indicator
      TH-3010 Internal Thread Height Gage, 0-25-0, 1” Base Length 
      TH-3010-USS USS Improved Buttress Internal Thread Height Gage with balanced dial and T500C-USS
      TH-3012 Internal Thread Height Gage, 0-25-0 ?” - 2” NPT
      TH-3012-1 Internal Thread Height Gage, 0-10-0, ?” - 2” NPT, .0001" Res. Indicator
      Thread Data Chart Thread Data Chart
      Thread Height Standard Calibration (except 1016 standard)
      Thread Rolls Calibration
      TI-ACME-INT Tapered Insert Identifier, Internal Acme- 3P, 3.5P, 4P, 5P, 6P, 8P, 10P, 12P, 14P,  and 16P
      TI-RSC-60 Tapered Insert Identifiers V032, V038R, V040, V050, V055, V066, V076
      TI-RSC-90 Tapered Insert Identifiers A-0.094, 90-V-0.050, 90-V-0.050, 90-V-0.084
      TI-SACME-INT Tapered Insert Identifier, Internal StubAcme- 3P, 3.5P, 4P, 5P, 6P, 8P, 10P, 12P, 14P,  and 16P
      TI-T&C Tapered Insert Identifier, 3/4" & 1" Tubing and Casing- 8 Round, 10 Round, Internal Buttress, and External Buttress
      TM10-2-3 Special T-Micrometer  -  Base  10.00" wide -  Range 2" - 3"
      TM11-2-3 Special T-Micrometer  -  Base  11.00" wide -  Range 2" - 3"
      TM12-0-1 T-MIC for Rotor major diameter 0” - 1” with ?” wide x 12” long base
      TM12-0-1-352 T-MIC for Rotor major diameter 0” - 1” with ?” wide x 12” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
      TM12-0-25mm T-MIC for Rotor major diameter 0 - 25 mm with ?” wide x 12” long base, metric thimble
      TM12-0-25mm-352 T-MIC for Rotor major diameter 0 - 25 mm with ?” wide x 12” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM12-100-125mm T-MIC for Rotor major diameter 100 mm - 125 mm with ?” wide x 12” long base, metric thimble
      TM12-100-125mm-352 T-MIC for Rotor major diameter 100 mm - 125 mm with ?” wide x 12” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM12-1-2 T-MIC for Rotor major diameter 1” - 2” with ?” wide x 12” long base
      TM12-1-2-352 T-MIC for Rotor major diameter 1” - 2” with ?” wide x 12” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
      TM12-125-150mm T-MIC for Rotor major diameter 125 mm - 150 mm with ?” wide x 12” long base, metric thimble
      TM12-125-150mm-352 T-MIC for Rotor major diameter 125 mm - 150 mm with ?” wide x 12” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM12-150-175mm T-MIC for Rotor major diameter 150 mm - 175 mm with ?” wide x 12” long base, metric thimble
      TM12-150-175mm-352 T-MIC for Rotor major diameter 150 mm - 175 mm with ?” wide x 12” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM12-175-200mm T-MIC for Rotor major diameter 175 mm - 200 mm with ?” wide x 12” long base, metric thimble
      TM12-175-200mm-352 T-MIC for Rotor major diameter 175 mm - 200 mm with ?” wide x 12” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM12-200-225mm T-MIC for Rotor major diameter 200 mm - 225 mm with ?” wide x 12” long base, metric thimble
      TM12-200-225mm-352 T-MIC for Rotor major diameter 200 mm - 225 mm with ?” wide x 12” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM12-2-3 T-MIC for Rotor major diameter 2” - 3” with ?” wide x 12” long base
      TM12-2-3-352 T-MIC for Rotor major diameter 2” - 3” with ?” wide x 12” long baseand the Mitutoyo 350-352-10 digital micrometer and SPC output.
      TM12-25-50mm T-MIC for Rotor major diameter 25 mm - 50 mm with ?” wide x 12” long base, metric thimble
      TM12-25-50mm-352 T-MIC for Rotor major diameter 25 mm - 50 mm with ?” wide x 12” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM12-3-4 T-MIC for Rotor major diameter 3” - 4” with ?” wide x 12” long base
      TM12-3-4-352 T-MIC for Rotor major diameter 3” - 4” with ?” wide x 12” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
      TM12-4-5 T-MIC for Rotor major diameter 4” - 5” with ?” wide x 12” long base
      TM12-4-5-352 T-MIC for Rotor major diameter 4” - 5” with ?” wide x 12” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
      TM12-50-75mm T-MIC for Rotor major diameter 50 mm - 75 mm with ?” wide x 12” long base, metric thimble
      TM12-50-75mm-352 T-MIC for Rotor major diameter 50 mm - 75 mm with ?” wide x 12” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM12-5-6 T-MIC for Rotor major diameter 5” - 6” with ?” wide x 12” long base
      TM12-5-6-352 T-MIC for Rotor major diameter 5” - 6” with ?” wide x 12” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
      TM12-6-7 T-MIC for Rotor major diameter 6” - 7” with ?” wide x 12” long base
      TM12-6-7-352 T-MIC for Rotor major diameter 6” - 7” with ?” wide x 12” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
      TM12-75-100mm T-MIC for Rotor major diameter 75 mm - 100 mm with ?” wide x 12” long base, metric thimble
      TM12-75-100mm-352 T-MIC for Rotor major diameter 75 mm - 100 mm with ?” wide x 12” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM12-7-8 T-MIC for Rotor major diameter 7” - 8” with ?” wide x 12” long base
      TM12-7-8-352 T-MIC for Rotor major diameter 7” - 8” with ?” wide x 12” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
      TM12-8-9 T-MIC for Rotor major diameter 8” - 9” with ?” wide x 12” long base
      TM12-8-9-352 T-MIC for Rotor major diameter 8” - 9” with ?” wide x 12” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
      TM16-2-3 Special T-Micrometer  -  Base  16.00" wide -  Range 2" - 3"
      TM18-0-1 T-MIC for Rotor major diameter 0” - 1” with ?” wide x 18” long base
      TM18-0-1-352 T-MIC for Rotor major diameter 0” - 1” with ?” wide x 18” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
      TM18-0-25mm T-MIC for Rotor major diameter 0 mm - 25mm with ?” wide x 18” long base, metric thimble
      TM18-0-25mm-352 T-MIC for Rotor major diameter 0 mm - 25mm with ?” wide x 18” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM18-100-125mm T-MIC for Rotor major diameter 100 mm - 125 mm with ?” wide x 18” long base, metric thimble
      TM18-100-125mm-352 T-MIC for Rotor major diameter 100 mm - 125 mm with ?” wide x 18” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM18-1-2 T-MIC for Rotor major diameter 1” - 2” with ?” wide x 18” long base
      TM18-1-2-352 T-MIC for Rotor major diameter 1” - 2” with ?” wide x 18” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
      TM18-125-150mm T-MIC for Rotor major diameter 125 mm - 150 mm with ?” wide x 18” long base, metric thimble
      TM18-125-150mm-352 T-MIC for Rotor major diameter 125 mm - 150 mm with ?” wide x 18” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM18-150-175mm T-MIC for Rotor major diameter 150 mm - 175 mm with ?” wide x 18” long base, metric thimble
      TM18-150-175mm-352 T-MIC for Rotor major diameter 150 mm - 175 mm with ?” wide x 18” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM18-175-200mm T-MIC for Rotor major diameter 175 mm - 200 mm with ?” wide x 18” long base, metric thimble
      TM18-175-200mm-352 T-MIC for Rotor major diameter 175 mm - 200 mm with ?” wide x 18” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM18-200-225mm T-MIC for Rotor major diameter 200 mm - 225 mm with ?” wide x 18” long base, metric thimble
      TM18-200-225mm-352 T-MIC for Rotor major diameter 200 mm - 225 mm with ?” wide x 18” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM18-2-3 T-MIC for Rotor major diameter 2” - 3” with ?” wide x 18” long base
      TM18-2-3-352 T-MIC for Rotor major diameter 2” - 3” with ?” wide x 18” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
      TM18-25-50mm T-MIC for Rotor major diameter 25 mm - 50 mm with ?” wide x 18” long base, metric thimble
      TM18-25-50mm-352 T-MIC for Rotor major diameter 25 mm - 50 mm with ?” wide x 18” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM18-3-4 T-MIC for Rotor major diameter 3” - 4” with ?” wide x 18” long base
      TM18-3-4-352 T-MIC for Rotor major diameter 3” - 4” with ?” wide x 18” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
      TM18-4-5 T-MIC for Rotor major diameter 4” - 5” with ?” wide x 18” long base
      TM18-4-5-352 T-MIC for Rotor major diameter 4” - 5” with ?” wide x 18” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
      TM18-50-75mm T-MIC for Rotor major diameter 50 mm - 75 mm with ?” wide x 18” long base, metric thimble
      TM18-50-75mm-352 T-MIC for Rotor major diameter 50 mm - 75 mm with ?” wide x 18” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM18-5-6 T-MIC for Rotor major diameter 5” - 6” with ?” wide x 18” long base
      TM18-5-6-352 T-MIC for Rotor major diameter 5” - 6” with ?” wide x 18” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
      TM18-6-7 T-MIC for Rotor major diameter 6” - 7” with ?” wide x 18” long base
      TM18-6-7-352 T-MIC for Rotor major diameter 6” - 7” with ?” wide x 18” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
      TM18-75-100mm T-MIC for Rotor major diameter 75 mm - 100 mm with ?” wide x 18” long base, metric thimble
      TM18-75-100mm-352 T-MIC for Rotor major diameter 75 mm - 100 mm with ?” wide x 18” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM18-7-8 T-MIC for Rotor major diameter 7” - 8” with ?” wide x 18” long base
      TM18-7-8-352 T-MIC for Rotor major diameter 7” - 8” with ?” wide x 18” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
      TM18-8-9 T-MIC for Rotor major diameter 8” - 9” with ?” wide x 18” long base
      TM18-8-9-352 T-MIC for Rotor major diameter 8” - 9” with ?” wide x 18” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
      TM20-2-3 Special T-Micrometer  -  Base  20.00" wide -  Range 2" - 3"
      TM20-2-3-352 T-MIC for Rotor major diameter 2-3" with ?" wide x 20" long base and Mitutoyo 350-352-10 digital micrometer and SPC output
      TM24-0-1 T-MIC for Rotor major diameter 0" - 1" with 1/2" wide x 24" long base
      TM24-0-1-352 T-MIC for Rotor major diameter 0" - 1" with 1/2" wide x 24" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM24-0-25 T-MIC for Rotor major diameter 25 mm - 50 mm with ?” wide x 24” long base, metric thimble
      TM24-0-25mm-352 T-MIC for Rotor major diameter 25 mm - 50 mm with ?” wide x 24” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM24-100-125 T-MIC for Rotor major diameter 100 mm - 125 mm with ?” wide x 24” long base, metric thimble
      TM24-100-125mm-352 T-MIC for Rotor major diameter 100 mm - 125 mm with ?” wide x 24” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM24-1-2 T-MIC for Rotor major diameter 1" - 2" with ?" wide x 24" long base
      TM24-1-2-352 T-MIC for Rotor major diameter 1" - 2" with 1/2" wide x 24" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM24-125-150 T-MIC for Rotor major diameter 125 mm - 150 mm with ?” wide x 24” long base, metric thimble
      TM24-125-150mm-352 T-MIC for Rotor major diameter 125 mm - 150 mm with ?” wide x 24” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM24-150-175 T-MIC for Rotor major diameter 150 mm - 175 mm with ?” wide x 24” long base, metric thimble
      TM24-150-175mm-352 T-MIC for Rotor major diameter 150 mm - 175 mm with ?” wide x 24” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM24-175-200 T-MIC for Rotor major diameter 175 mm - 200 mm with ?” wide x 24” long base, metric thimble
      TM24-175-200mm-352 T-MIC for Rotor major diameter 175 mm - 200 mm with ?” wide x 24” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM24-200-225 T-MIC for Rotor major diameter 200 mm - 225 mm with ?” wide x 24” long base, metric thimble
      TM24-200-225mm-352 T-MIC for Rotor major diameter 200 mm - 225 mm with ?” wide x 24” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM24-2-3 T-MIC for Rotor major diameter 2" - 3" with ?" wide x 24" long base
      TM24-2-3-352 T-MIC for Rotor major diameter 2" - 3" with 1/2" wide x 24" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM24-25-50mm T-MIC for Rotor major diameter 25 mm - 50 mm with ?” wide x 24” long base, metric thimble
      TM24-25-50mm-352 T-MIC for Rotor major diameter 25 mm - 50 mm with ?” wide x 24” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM24-3-4 T-MIC for Rotor major diameter 3" - 4" with ?" wide x 24" long base
      TM24-3-4-352 T-MIC for Rotor major diameter 3" - 4" with 1/2" wide x 24" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM24-4-5 T-MIC for Rotor major diameter 4" - 5" with ?" wide x 24" long base
      TM24-4-5-352 T-MIC for Rotor major diameter 4" - 5" with 1/2" wide x 24" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM24-50-75 T-MIC for Rotor major diameter 50 mm - 75 mm with ?” wide x 24” long base, metric thimble
      TM24-50-75mm-352 T-MIC for Rotor major diameter 50 mm - 75 mm with ?” wide x 24” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM24-5-6 T-MIC for Rotor major diameter 5" - 6" with ?" wide x 24" long base
      TM24-5-6-352 T-MIC for Rotor major diameter 5" - 6" with ?" wide x 24" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM24-6-7 T-MIC for Rotor major diameter 6" - 7" with ?" wide x 24" long base
      TM24-6-7-352 T-MIC for Rotor major diameter 6" - 7" with ?" wide x 24" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM24-75-100 T-MIC for Rotor major diameter 75 mm - 100 mm with ?” wide x 24” long base, metric thimble
      TM24-75-100mm-352 T-MIC for Rotor major diameter 75 mm - 100 mm with ?” wide x 24” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM24-7-8 T-MIC for Rotor major diameter 7" - 8" with ?" wide x 24" long base
      TM24-7-8-352 T-MIC for Rotor major diameter 7" - 8" with ?" wide x 24" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM24-8-9 T-MIC for Rotor major diameter 8" - 9" with ?" wide x 24" long base
      TM24-8-9-352 T-MIC for Rotor major diameter 8" - 9" with ?" wide x 24" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM27-2-3 T-MIC for Rotor major diameter 2" - 3" with ?" wide x 28" long base
      TM3.5-0-1 Special T-Micrometer  -  Base  3.50" wide -  Range 0" - 1"    
      TM3-0-1 Special T-Micrometer  -  Base 3.0" wide -  Range 0" - 1"
      TM4.75-1-2 Special T-Micrometer  -  Base 4.75" wide -  Range 1" - 2" 
      TM-4-1-144M T-MIC Micrometer Holder w/micrometer head (Mitutoyo flat anvil)
      TM4-1-2 Special T-Micrometer  -  Base 4.00" wide -  Range 1" - 2" 
      TM5.5-1-2 Special T-Micrometer  -  Base 5.50" wide -  Range 1" - 2" 
      TM6-0-1 T-MIC for Rotor major diameter 0” - 1” with ?” wide x 6” long base
      TM6-0-1-352 T-MIC for Rotor major diameter 0” - 1” with ?” wide x 6” long base
      TM6-0-25mm T-MIC for Rotor major diameter 0 - 25 mm with ?” wide x 6” long base, metric thimble
      TM6-0-25mm-352 T-MIC for Rotor major diameter 0 - 25 mm with ?” wide x 6” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM6-100-125mm T-MIC for Rotor major diameter 100 mm - 125 mm with ?” wide x 6” long base, metric thimble
      TM6-100-125mm-352 T-MIC for Rotor major diameter 100 mm - 125 mm with ?” wide x 6” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM6-1-2 T-MIC for Rotor major diameter 1” - 2” with ?” wide x 6” long base
      TM6-1-2-352 T-MIC for Rotor major diameter 1” - 2” with ?” wide x 6” long base
      TM6-125-150mm T-MIC for Rotor major diameter 125 mm - 150 mm with ?” wide x 6” long base, metric thimble
      TM6-125-150mm-352 T-MIC for Rotor major diameter 125 mm - 150 mm with ?” wide x 6” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM6-150-175mm T-MIC for Rotor major diameter 150 mm - 175 mm with ?” wide x 6” long base, metric thimble
      TM6-150-175mm-352 T-MIC for Rotor major diameter 150 mm - 175 mm with ?” wide x 6” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM6-175-200mm T-MIC for Rotor major diameter 175 mm - 200 mm with ?” wide x 6” long base, metric thimble
      TM6-175-200mm-352 T-MIC for Rotor major diameter 175 mm - 200 mm with ?” wide x 6” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM6-200-225mm T-MIC for Rotor major diameter 200 mm - 225 mm with ?” wide x 6” long base, metric thimble
      TM6-200-225mm-352 T-MIC for Rotor major diameter 200 mm - 225 mm with ?” wide x 6” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM6-2-3 T-MIC for Rotor major diameter 2” - 3” with ?” wide x 6” long base
      TM6-2-3-352 T-MIC for Rotor major diameter 2” - 3” with ?” wide x 6” long base
      TM6-25-50mm T-MIC for Rotor major diameter 25 mm - 50 mm with ?” wide x 6” long base, metric thimble
      TM6-25-50mm-352 T-MIC for Rotor major diameter 25 mm - 50 mm with ?” wide x 6” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM6-3-4 T-MIC for Rotor major diameter 3” - 4” with ?” wide x 6” long base
      TM6-3-4-352 T-MIC for Rotor major diameter 3” - 4” with ?” wide x 6” long base
      TM6-4-5 T-MIC for Rotor major diameter 4” - 5” with ?” wide x 6” long base
      TM6-4-5-352 T-MIC for Rotor major diameter 4” - 5” with ?” wide x 6” long base
      TM6-50-75mm T-MIC for Rotor major diameter 50 mm - 75 mm with ?” wide x 6” long base, metric thimble
      TM6-50-75mm-352 T-MIC for Rotor major diameter 50 mm - 75 mm with ?” wide x 6” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM6-5-6 T-MIC for Rotor major diameter 5” - 6” with ?” wide x 6” long base
      TM6-5-6-352 T-MIC for Rotor major diameter 5” - 6” with ?” wide x 6” long base
      TM6-6-7 T-MIC for Rotor major diameter 6” - 7” with ?” wide x 6” long base
      TM6-6-7-352 T-MIC for Rotor major diameter 6” - 7” with ?” wide x 6” long base
      TM6-75-100mm T-MIC for Rotor major diameter 75 mm - 100 mm with ?” wide x 6” long base, metric thimble
      TM6-75-100mm-352 T-MIC for Rotor major diameter 75 mm - 100 mm with ?” wide x 6” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM6-7-8 T-MIC for Rotor major diameter 7” - 8” with ?” wide x 6” long base
      TM6-7-8-352 T-MIC for Rotor major diameter 7” - 8” with ?” wide x 6” long base
      TM6-8-9 T-MIC for Rotor major diameter 8” - 9” with ?” wide x 6” long base
      TM6-8-9-352 T-MIC for Rotor major diameter 8” - 9” with ?” wide x 6” long base
      TM7.5-2-3 Special T-Micrometer  -  Base  7.50" wide -  Range 2" - 3"
      TM8-0-1 T-MIC for Rotor major diameter 0" - 1" with 1/2" wide x 8" long base
      TM8-0-1-352 T-MIC for Rotor major diameter 0" - 1" with 1/2" wide x 8" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM8-0-25mm T-MIC for Rotor major diameter 0 - 25 mm with ?” wide x 8” long base, metric thimble
      TM8-0-25mm-352 T-MIC for Rotor major diameter 0 - 25 mm with ?” wide x 8” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM8-100-125mm T-MIC for Rotor major diameter 100 mm - 125 mm with ?” wide x 8” long base, metric thimble
      TM8-100-125mm-352 T-MIC for Rotor major diameter 100 mm - 125 mm with ?” wide x 8” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM8-1-2 T-MIC for Rotor major diameter 1" - 2" with ?" wide x 8" long base
      TM8-1-2-352 T-MIC for Rotor major diameter 1" - 2" with ?” wide x 8” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM8-125-150mm T-MIC for Rotor major diameter 125 mm - 150 mm with ?” wide x 8” long base, metric thimble
      TM8-125-150mm-352 T-MIC for Rotor major diameter 125 mm - 150 mm with ?” wide x 8” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM8-150-175mm T-MIC for Rotor major diameter 150 mm - 175 mm with ?” wide x 8” long base, metric thimble
      TM8-150-175mm-352 T-MIC for Rotor major diameter 150 mm - 175 mm with ?” wide x 8” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM8-175-200mm T-MIC for Rotor major diameter 175 mm - 200 mm with ?” wide x 8” long base, metric thimble
      TM8-175-200mm-352 T-MIC for Rotor major diameter 175 mm - 200 mm with ?” wide x 8” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM8-200-225mm T-MIC for Rotor major diameter 200 mm - 225 mm with ?” wide x 8” long base, metric thimble
      TM8-200-225mm-352 T-MIC for Rotor major diameter 200 mm - 225 mm with ?” wide x 8” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM8-2-3 T-MIC for Rotor major diameter 2" - 3" with ?" wide x 8" long base
      TM8-2-3-352 T-MIC for Rotor major diameter 2" - 3" with ?” wide x 8” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM8-25-50mm T-MIC for Rotor major diameter 25mm - 50 mm with ?” wide x 8” long base, metric thimble
      TM8-25-50mm-352 T-MIC for Rotor major diameter 25mm - 50 mm with ?” wide x 8” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM8-3-4 T-MIC for Rotor major diameter 3" - 4"with ?" wide x 8" long base
      TM8-3-4-352 T-MIC for Rotor major diameter 3" - 4" with ?” wide x 8” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM8-4-5 T-MIC for Rotor major diameter 4" - 5" with ?" wide x 8" long base
      TM8-4-5-352 T-MIC for Rotor major diameter 4" - 5"  with ?” wide x 8” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM8-50-75mm T-MIC for Rotor major diameter 50 mm - 75 mm with ?” wide x 8” long base, metric thimble
      TM8-50-75mm-352 T-MIC for Rotor major diameter 50 mm - 75 mm with ?” wide x 8” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM8-5-6 T-MIC for Rotor major diameter 5" - 6" with ?" wide x 8" long base
      TM8-5-6-352 T-MIC for Rotor major diameter 5" - 6"  with ?” wide x 8” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM8-6-7 T-MIC for Rotor major diameter 6" - 7" with ?" wide x 8" long base
      TM8-6-7-352 T-MIC for Rotor major diameter 6" - 7"  with ?” wide x 8” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM8-75-100mm T-MIC for Rotor major diameter 75mm - 100 mm with ?” wide x 8” long base, metric thimble
      TM8-75-100mm-352 T-MIC for Rotor major diameter 75mm - 100 mm with ?” wide x 8” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM8-7-8 T-MIC for Rotor major diameter 7" - 8" with ?" wide x 8" long base
      TM8-7-8-352 T-MIC for Rotor major diameter 7" - 8"  with ?” wide x 8” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM8-8-9 T-MIC for Rotor major diameter 8" - 9" with ?" wide x 8" long base
      TM8-8-9-352 T-MIC for Rotor major diameter 8" - 9"  with ?” wide x 8” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
      TM9-0-1 Special T-Micrometer  -  Base  9" wide -  Range 0" - 1"
      TM9-2-3 Special T-Micrometer  -  Base  9" wide -  Range 2" - 3"
      TP-11-1/2V Profile Gage-11? V API Line Pipe, American Std. NPT, ?” TPF, 11?  TPI, 11? V Thread
      TP-3.5-2-50 Profile Gage- 3?” - 6?” Hughes H-90, 2” TPF, 3.5 TPI, H-90
      TP-3.5-3-50 Profile Gage- 7” - 8?” Hughes H-90, 3” TPF, 3.5 TPI, H-90
      TP-3-1.25-84 Profile Gage- 2?” - 3?” Hughes Slim Line, 1.25” TPF, 3TPI, H-90
      TP-4-1.5-76 Profile Gage- 2?” - 3?” P.A.C. Connections, 2?” - 4?” American Open Hole, 1.5” TPF, 4 TPI, V-0.076
      TP-4-2-38 Profile Gage- 4” API Full Hole, 3?” - 5” Hughes Xtra Hole, 2?” - 4?” Hughes Slim Hole, 2?” - 6?” INT Flush, API Numbered Connections #23 - #50, 2” TPF, 4 TPI, V-0.038R
      TP-4-2-38-H Profile Gage- 2?” Hughes Xtra Hole, 2” TPF, 4 TPI, V-0.038R
      TP-4-2-50 Profile Gage- 6?” API REG, 5?” & 6?” API Full Hole, 2” TPF, 4 TPI, V-0.050
      TP-4-3-38 Profile Gage- API Numbered Connections #56 - #77, 3” TPF, 4 TPI, V-0.038R
      TP-4-3-50 Profile Gage- 5?”, 7?”, & 8?” API REG, 3” TPF, 4 TPI, V-0.050
      TP-5-3-40 Profile Gage- 2?” - 4?” API REG, 3?” & 4?” API Full Hole, 3” TPF, 5 TPI, V-0.040
      TP-5BTC1-EXT Profile Gage- API Buttress Casing, External, 16” - 20”, 1” TPF, 5 TPI 
      TP-5BTC1-INT Profile Gage- API Buttress Casing, Internal, 16” - 20”, 1” TPF, 5 TPI
      TP-5BTC75-EXT Profile Gage-API Buttress Casing, External, 4?” - 13?”, ?” TPF, 5 TPI
      TP-5BTC75-INT Profile Gage-API Buttress Casing, Internal, 4?” - 13?”, ?” TPF, 5 TPI
      TP-6-1.5-55 Profile Gage- API Numbered Connections #10, #12, #13, #16, M.T. (Macaroni Tubing), 1.5” TPF, 6 TPI, V-0.055
      TP-6-2-32 Profile Gage- 2?" - 2?" Hughes External Flush, 2” TPF, 6 TPI, V-0.032
      TP-745-10P Profile Gage-  7° x 45° Buttress, 10 TPI
      TP-745-12P Profile Gage-  7° x 45° Buttress, 12 TPI
      TP-745-16P Profile Gage-  7° x 45° Buttress, 16 TPI
      TP-745-2P Profile Gage-  7° x 45° Buttress, 2 TPI
      TP-745-3.5P Profile Gage-  7° x 45° Buttress, 3.5 TPI
      TP-745-4P Profile Gage-  7° x 45° Buttress, 4 TPI
      TP-745-6P Profile Gage-  7° x 45° Buttress, 6 TPI
      TP-745-8P Profile Gage-  7° x 45° Buttress, 8 TPI
      TP-8V Profile Gage- 8V API Line Pipe, American Std. NPT, ?” TPF, 8 TPI, 8 V Thread
      TP-9060LS 90° & 60° Threads, Tool Grinding & Setting Gage
      TPD .020 R, Contact Point for Pit Depth Gage, PD-3003, PD-3004
      TP-GPA-__P Internal/External general purpose ACME thread profile gage
      TP-GPA-10P Internal/External general purpose ACME thread profile gage, 10 pitch
      TP-GPA-12P Internal/External general purpose ACME thread profile gage, 12 pitch
      TP-GPA-14P Internal/External general purpose ACME thread profile gage, 14 pitch
      TP-GPA-16P Internal/External general purpose ACME thread profile gage, 16 pitch
      TP-GPA-18P Internal/External general purpose ACME thread profile gage, 18 pitch
      TP-GPA-1P Internal/External general purpose ACME thread profile gage, 1 pitch
      TP-GPA-20P Internal/External general purpose ACME thread profile gage, 20 pitch
      TP-GPA-25P Internal/External general purpose ACME thread profile gage, 2.5 pitch
      TP-GPA-2P Internal/External general purpose ACME thread profile gage, 2 pitch
      TP-GPA-35P Internal/External general purpose ACME thread profile gage, 3.5 pitch
      TP-GPA-3P Internal/External general purpose ACME thread profile gage, 3 pitch
      TP-GPA-4P Internal/External general purpose ACME thread profile gage, 4 pitch
      TP-GPA-5P Internal/External general purpose ACME thread profile gage, 5 pitch
      TP-GPA-6P Internal/External general purpose ACME thread profile gage, 6 pitch
      TP-GPA-8P Internal/External general purpose ACME thread profile gage, 8 pitch
      TP-ME-__P External ISO Metric series thread profile gage
      TP-MI-__P Internal ISO Metric series thread profile gage
      TP-NPT-11-1/2 NPT Threads, ?” TPF, 11.5TPI
      TP-NPT-14 NPT Threads, ?” TPF, 14TPI
      TP-NPT-8 NPT Threads, ?” TPF, 8TPI
      TP-RTC-10R All API 10R Tubing, ?” TPF, 10 TPI 10 Round
      TP-RTC-8R All API 8R Casing, Tubing & Drill Pipe, ?” TPF, 8 TPI, 8 Round
      TP-SA-__P Internal/external Stub ACME thread profile gage
      TP-SA-10P Internal/external Stub ACME thread profile gage, 10 pitch
      TP-SA-12P Internal/external Stub ACME thread profile gage, 12 pitch
      TP-SA-14P Internal/external Stub ACME thread profile gage, 14 pitch
      TP-SA-16P Internal/external Stub ACME thread profile gage, 16 pitch
      TP-SA-18P Internal/external Stub ACME thread profile gage, 18 pitch
      TP-SA-20P Internal/external Stub ACME thread profile gage, 20 pitch
      TP-SA-4P Internal/external Stub ACME thread profile gage, 4 pitch
      TP-SA-5P Internal/external Stub ACME thread profile gage, 5 pitch
      TP-SA-6P Internal/external Stub ACME thread profile gage, 6 pitch
      TP-SA-8P Internal/external Stub ACME thread profile gage, 8 pitch
      TP-SAM1-4P Modified 1 Stub ACME thread profile gage, 4 pitch
      TP-SAM1-5P Modified 1 Stub ACME thread profile gage, 5 pitch
      TP-SAM1-6P Modified 1 Stub ACME thread profile gage, 6 pitch
      TP-SAM2-__P Modified 2 Stub ACME thread profile gage, select pitch
      TP-SAM2-10P Modified 2 Stub ACME thread profile gage,10pitch
      TP-SAM2-12P Modified 2 Stub ACME thread profile gage, 12 pitch
      TP-SAM2-14P Modified 2 Stub ACME thread profile gage, 14 pitch
      TP-SAM2-16P Modified 2 Stub ACME thread profile gage, 16 pitch
      TP-SAM2-18P Modified 2 Stub ACME thread profile gage, 18 pitch
      TP-SAM2-20P Modified 2 Stub ACME thread profile gage, 20 pitch
      TP-SAM2-4P Modified 2 Stub ACME thread profile gage, 4 pitch
      TP-SAM2-5P Modified 2 Stub ACME thread profile gage, 5 pitch
      TP-SAM2-6P Modified 2 Stub ACME thread profile gage, 6 pitch
      TP-SAM2-8P Modified 2 Stub ACME thread profile gage, 8 pitch
      TP-UNVE-__P External UN series thread profile gage
      TP-UNVE-10P External UN series thread profile gage, 10 pitch
      TP-UNVE-12P External UN series thread profile gage, 12 pitch
      TP-UNVE-14P External UN series thread profile gage, 14 pitch
      TP-UNVE-16P External UN series thread profile gage, 16 pitch
      TP-UNVE-18P External UN series thread profile gage, 18 pitch
      TP-UNVE-20P External UN series thread profile gage, 20 pitch
      TP-UNVE-24P External UN series thread profile gage, 24 pitch
      TP-UNVE-4P External UN series thread profile gage, 4 pitch
      TP-UNVE-6P External UN series thread profile gage, 6 pitch
      TP-UNVE-8P External UN series thread profile gage, 8 pitch
      TP-UNVI-__P Internal UN series thread profile gage
      TP-UNVI-10P Internal UN series thread profile gage, 10 pitch
      TP-UNVI-12P Internal UN series thread profile gage, 12 pitch
      TP-UNVI-14P Internal UN series thread profile gage, 14 pitch
      TP-UNVI-16P Internal UN series thread profile gage, 16 pitch 
      TP-UNVI-18P Internal UN series thread profile gage, 18 pitch
      TP-UNVI-20P Internal UN series thread profile gage, 20 pitch 
      TP-UNVI-24P Internal UN series thread profile gage, 24 pitch 
      TP-UNVI-4P Internal UN series thread profile gage, 4 pitch
      TP-UNVI-6P Internal UN series thread profile gage, 6 pitch
      TP-UNVI-8P Internal UN series thread profile gage, 8 pitch
      TP-USS-8P  Profile Gage- USS Improved Buttress
      TR-10R MRP Thread Roll- All API 10 Round Tubing (Set of 2)
      TR-11LP MRP Thread Roll- 11? “V” API Line Pipe, American Std. NPT (Set of 2)
      TR-312SLH9 MRP Thread Roll- 2?” - 3?” Hughes Slim Line (Set of 2)
      TR-352H9 MRP Thread Roll- 3?” - 6?” Hughes H-90 (Set of 2)
      TR-353H9 MRP Thread Roll- 7” - 8?” Hughes H-90 (Set of 2)
      TR-41576 MRP Thread Roll- P.A.C. Connections, 2?” - 3?”, 2 “ - 4?” American Open Hole (Set of 2)
      TR-4238 MRP Thread Roll- 4” API Full Hole, API Numbered Connections #23 - #50, 2?” - 5” Hughes Xtra Hole, 5?” & 6?” API Full Hole, 2?” - 4?” Hughes Slim Hole, 6?” API REG, 2?” - 5?” API INT Flush (Set of 2)
      TR-4338 MRP Thread Roll- API Numbered Connections #56 - #77, 5?”, 7?”, & 8?” API REG (Set of 2)
      TR-5340 MRP Thread Roll- 2?” - 4?” API REG, 3?” - 4?” API Full Hole
      TR-61555 MRP Thread Roll- API Numbered Connections #10, #12, #13, #16M.T. (Macaroni Tubing) (Set of 2)
      TR-6232 MRP Thread Roll- 2?” & 2?” External Flush (Set of 2)
      TR-8LP MRP Thread Roll- 8V API Line Pipe, American Std. NPT (Set of 2)
      TR-8R MRP Thread Roll- All API 8 Round Tubing (Set of 2)
      TRA-10P Thread Roll- 10 pitch ACME (Set of 2)
      TRA-12P Thread Roll- 12 pitch ACME (Set of 2)
      TRA-14P Thread Roll- 14 pitch ACME (Set of 2)
      TRA-16P Thread Roll- 16 pitch ACME (Set of 2)
      TRA-18P Thread Roll- 18 pitch ACME (Set of 2)
      TRA-2P Thread Roll- 2 pitch ACME (Set of 2)
      TRA-3P Thread Roll- 3 pitch ACME (Set of 2)
      TRA-4P Thread Roll- 4 pitch ACME (Set of 2)
      TRA-5P Thread Roll- 5 pitch ACME (Set of 2)
      TRA-6P Thread Roll- 6 pitch ACME (Set of 2)
      TRA-8P Thread Roll- 8 pitch ACME (Set of 2)
      TRAC-2012 CAL FL Calibration Mic Trac 2012 with Force Lok
      TRAC-2012 CAL NF Calibration Mic Trac 2012 Non Force Lok 
      TRAC-2012 with SLEC Calibration Mic Trac 2012 with SLEC file
      TRAC-2024 CAL FL Calibration Mic Trac 2024 with Force Lok
      TRAC-2024 CAL NF Calibration Mic Trac 2024 Non Force Lok
      TRAC-2024 with SLEC Calibration Mic Trac 2024 with SLEC file
      TRAC-2036 CAL FL Calibration Mic Trac 2036 with Force Lok
      TRAC-2036 CAL NF Calibration Mic Trac 2036 Non Force Lok
      TRAC-2036 with SLEC Calibration Mic Trac 2036 with SLEC file
      TRAC-2048 CAL FL Calibration Mic Trac 2048 with Force Lok
      TRAC-2048 CAL NF Calibration Mic Trac 2048 Non Force Lok
      TRAC-2048 with SLEC Calibration Mic Trac 2048 with SLEC file
      TRAC-2060 CAL FL Calibration Mic Trac 2060 with Force Lok
      TRAC-2060 CAL NF Calibration Mic Trac 2060 Non Force Lok
      Training Options A Option A: Training at customer’s facility (per day, plus airfare)
      Training Options B Option B: Training at Gagemaker’s facility (per day, per person)
      TR-B10E Thread Roll- API Buttress Casing, External, 16” - 20” (Set of 2)
      TR-B10I Thread Roll- API Buttress Casing, Internal, 16” - 20” (Set of 2)
      TRB745-10P Thread Roll- 10 pitch, 7°x 45° (Set of 2)
      TRB745-12P Thread Roll- 12 pitch, 7°x 45° (Set of 2)
      TRB745-16P Thread Roll- 16 pitch, 7°x 45° (Set of 2)
      TRB745-2P Thread Roll- 2 pitch, 7°x 45° (Set of 2)
      TRB745-3.5P Thread Roll- 3.5 pitch, 7°x 45° (Set of 2)
      TRB745-3P Thread Roll- 3 pitch, 7°x 45° (Set of 2)
      TRB745-4P Thread Roll- 4 pitch, 7°x 45° (Set of 2)
      TRB745-5P Thread Roll- 5 pitch, 7°x 45° (Set of 2)
      TRB745-6P Thread Roll- 6 pitch, 7°x 45° (Set of 2)
      TRB745-8P Thread Roll- 8 pitch, 7°x 45° (Set of 2)
      TR-B75 MRP Thread Roll- API Buttress Casing, 4?” - 13?” (Set of 2)
      TR-BL Blank Thread roll set 
      TRME-15P Thread Roll- 1.5mm pitch (Set of 2), External Metric
      TRME-175P Thread Roll- 1.75mm pitch (Set of 2), External Metric
      TRME-1P Thread Roll- 1mm pitch (Set of 2), External Metric
      TRME-25P Thread Roll- 2.5mm pitch (Set of 2), External Metric
      TRME-2P Thread Roll- 2mm pitch (Set of 2), External Metric
      TRME-35P Thread Roll- 3.5mm pitch (Set of 2), External Metric
      TRME-3P Thread Roll- 3mm pitch (Set of 2), External Metric
      TRME-4P Thread Roll- 4mm pitch (Set of 2), External Metric
      TRME-8P Thread Roll- 8mm pitch (Set of 2), External Metric
      TRMI-125 Thread Roll- 1.25mm pitch (Set of 2), Internal Metric
      TRMI-15P Thread Roll- 1.5mm pitch (Set of 2), Internal Metric
      TRMI-175P Thread Roll- 1.75mm pitch (Set of 2), Internal Metric
      TRMI-1P Thread Roll- 1mm pitch (Set of 2), Internal Metric
      TRMI-25P Thread Roll- 2.5mm pitch (Set of 2), Internal Metric
      TRMI-2P Thread Roll- 2mm pitch (Set of 2), Internal Metric
      TRMI-35P Thread Roll- 3.5mm pitch (Set of 2), Internal Metric
      TRMI-3P Thread Roll- 3mm pitch (Set of 2), Internal Metric
      TRMI-4P Thread Roll- 4mm pitch (Set of 2), Internal Metric
      TRMI-8P   Thread Roll- 8mm pitch (Set of 2), Internal Metric
      TRSA-10P Thread Roll- 10 pitch Stub ACME (Set of 2)
      TRSA-12P Thread Roll- 12 pitch Stub ACME (Set of 2)
      TRSA-14P Thread Roll- 14 pitch Stub ACME (Set of 2)
      TRSA-16P Thread Roll- 16 pitch Stub ACME (Set of 2)
      TRSA-18P Thread Roll- 18 pitch Stub ACME (Set of 2)
      TRSA-20P Thread Roll- 20 pitch Stub ACME (Set of 2)
      TRSA-2P Thread Roll- 2 pitch Stub ACME (Set of 2)
      TRSA-3P Thread Roll- 3 pitch Stub ACME (Set of 2)
      TRSA-4P Thread Roll- 4 pitch Stub ACME (Set of 2)
      TRSA-5P Thread Roll- 5 pitch Stub ACME (Set of 2)
      TRSA-6P Thread Roll- 6 pitch Stub ACME (Set of 2)
      TRSA-8P Thread Roll- 8 pitch Stub ACME (Set of 2)
      TRSAM1-3P Thread Roll- 3 pitch Modified 1 Stub ACME (Set of 2)
      TRSAM2-12P Thread Roll -12 Pitch Stub ACME Mod 2 (Set of 2)
      TRSAM2-5P Thread Roll -5 Pitch Stub ACME Mod 2 (Set of 2)
      TRT-10P Thread Roll- 10 mm pitch Trapezoidal (Set of 2)
      TRT-12P Thread Roll- 12 mm pitch Trapezoidal (Set of 2)
      TRT-2P Thread Roll- 2 mm pitch Trapezoidal (Set of 2)
      TRT-3P Thread Roll- 3 mm pitch Trapezoidal (Set of 2)
      TRT-4P Thread Roll- 4 mm pitch Trapezoidal (Set of 2)
      TRT-5P Thread Roll- 5 mm pitch Trapezoidal (Set of 2)
      TRT-6P Thread Roll- 6 mm pitch Trapezoidal (Set of 2)
      TRT-8P Thread Roll- 8 mm pitch Trapezoidal (Set of 2)
      TRT-9P Thread Roll- 9 mm pitch Trapezoidal (Set of 2)
      TR-USS-8P USS Modified Buttress MRP Thread Roll. Supplied with Engr. Set-up Sheet for MIC TRAC Taper Block TF-75
      TRVE-10P Thread Roll- 10 pitch external 60° “V” (Set of 2)
      TRVE-12P Thread Roll- 12 pitch external 60° “V” (Set of 2)
      TRVE-14P Thread Roll- 14 pitch external 60° “V” (Set of 2)
      TRVE-16P Thread Roll- 16 pitch external 60° “V” (Set of 2)
      TRVE-18P Thread Roll- 18 pitch external 60° “V” (Set of 2)
      TRVE-20P Thread Roll- 20 pitch external 60° “V” (Set of 2)
      TRVE-24P Thread Roll- 24 pitch external 60° “V” (Set of 2)
      TRVE-28P Thread Roll- 28 pitch external 60° “V” (Set of 2)
      TRVE-32P Thread Roll- 32 pitch external 60° “V” (Set of 2)
      TRVE-4.5P Thread Roll- 4.5 pitch external 60° “V” (Set of 2)
      TRVE-4P Thread Roll- 4 pitch external 60° “V” (Set of 2)
      TRVE-5P Thread Roll- 5 pitch external 60° “V” (Set of 2)
      TRVE-6P Thread Roll- 6 pitch external 60° “V” (Set of 2)
      TRVE-8P Thread Roll- 8 pitch external 60° “V” (Set of 2)
      TRVI-10P Thread Roll- 10 pitch internal 60° “V” (Set of 2)
      TRVI-12P Thread Roll- 12 pitch internal 60° “V” (Set of 2)
      TRVI-14P Thread Roll- 14 pitch internal 60° “V” (Set of 2)
      TRVI-16P Thread Roll- 16 pitch internal 60° “V” (Set of 2)
      TRVI-18P Thread Roll- 18 pitch internal 60° “V” (Set of 2)
      TRVI-20P Thread Roll- 20 pitch internal 60° “V” (Set of 2)
      TRVI-24P Thread Roll- 24 pitch internal 60° “V” (Set of 2)
      TRVI-28P Thread Roll- 28 pitch internal 60° “V” (Set of 2)
      TRVI-32P Thread Roll- 32 pitch internal 60° “V” (Set of 2)
      TRVI-4.5P Thread Roll- 4.5 pitch internal 60° “V” (Set of 2)
      TRVI-4P Thread Roll- 4 pitch internal 60° “V” (Set of 2)
      TRVI-5P Thread Roll- 5 pitch internal 60° “V” (Set of 2)
      TRVI-6P Thread Roll- 6 pitch internal 60° “V” (Set of 2)
      TRVI-8P Thread Roll- 8 pitch internal 60° “V” (Set of 2)
      TS-1/12-WP TS-4000 Wear Pad Assembly, 1/12"
      TS-1/18-WP TS-4000 Wear Pad Assembly, 1/18"
      TS-1000 Shoulder Location Gage, Base Length 6”, 6" Reach
      TS-1000-1 Shoulder Location Gage, Base Length 6”, 6" Reach,.0001" Res. Indicator
      TS-1001 Shoulder Location Gage, Base Length 12”, 10" Reach
      TS-1001-1 Shoulder Location Gage, Base Length 12”, 10" Reach, .0001" Res. Indicator
      TS-1001B TS-1001 Base only, Length 12”
      TS-4000 Shoulder Depth Gage, 6.25" Reach (Specify Taper)
      TS-5000 (TS-4000-VM) Shoulder Depth Gage, 7.5" Reach (Specify Taper)
      TSS-1000 TS-1000 Setting Standard
      TSS-4000 TS-4000 Setting Standard
      TW-50 50 in-lb torque wrench w/ 5/32” hex wrench adapter
      UP-MRP-2500 Upgrade MRP-2500 from old style to new style 
      UP-MRP-5000 Upgrade MRP-5000 from old style to new style 
      UP-SBG-0100E 0100E Hardware Upgrade, includes calibration and evaluation free (does not include a SBG-GIB or computer hardware upgrade)
      UP-SBG-5000E 5000E Hardware Upgrade, includes calibration and evaluation free (does not include a SBG-GIB or computer hardware upgrade)
      WOOD-A Wooden Case, 54” X 17” X 3.5”, with foam
      WOOD-B Wooden Case, 48” X 10” X 3.5”, with foam
      WOOD-B-1 Wooden Case, 46” X 26” X 3.5”, with foam
      WOOD-C Wooden Case, 44” X 8” X 3.5”, with foam
      WOOD-D Wooden Case, 42” X 24” X 3.5”, with foam
      WOOD-E Wooden Case, 42” X 10” X 3.5”, with foam
      WOOD-F Wooden Case, 35” X 12” X 3.5”, with foam
      WOOD-G Wooden Case, 34” X 10” X 3.5”, with foam
      WOOD-H Wooden Case, 34” X 8” X 3.5”, with foam
      WOOD-I Wooden Case, 33” X 21” X 3.5”, with foam
      WOOD-J Wooden Case, 27” X 10” X 3.5”, with foam
      WOOD-J-1 Wooden Case, 27” X 9” X 3.5”, with foam
      WOOD-K Wooden Case, 26” X 15” X 3.5”, with foam
      WOOD-L Wooden Case, 25” X 10” X 3.5”, with foam
      WOOD-M Wooden Case, 22” X 12” X 3.5”, with foam
      WOOD-N Wooden Case, 22” X 8” X 3.5”, with foam
      WOOD-O Wooden Case, 21” X 8” X 3.5”, with foam
      WOOD-P Wooden Case, 17” X 10” X 3.5”, with foam
      WOOD-Q Wooden Case, 15” X 15” X 3.5”, with foam
      WT-9001 Wall Thickness Gage, 2?” - 4?”
      WT-9002 Wall Thickness Gage, 4?” - 9?”
      WT-9003 Wall Thickness Gage, 4?” - 13?”

      美国gagemaker螺纹量仪,货期4-6周,部分现货,价格全国最低。
      QQ客服
      点击这里给我发消息  
      网赚平台代打 898| 551| 44| 86| 908| 822| 191| 18| 848| 192| 506| 948| 783| 424| 709| 449| 961| 218| 218| 28| 639| 540| 643| 775| 944| 147| 477| 811| 530| 893| 100| 240| 677| 627| 354| 341| 749| 447| 401| 330| 940|