<tt id="l2zj0"></tt>
    1. 网站标志
      产品详情
       
      产品详情
      MRP-2002 GAGEMAKER

      MRP-2002 Internal PD Gage, w/ 4?” reach, 2?” - 20”
      MRP-2002-10 Internal PD Gage, w/ 10” reach, 3?” - 20”
      MRP-2002-7 Internal PD Gage, w/ 7” reach, 3?” - 20”
      MRP-2002-7-45 Back-Of-Box Seal Gage MRP style, 7" depth, points at 45° angle, 2 3/8" - 20" range
      MRP-2002-7-45-1 Back-Of-Box Seal Gage MRP style, 7" depth, points at 45° angle, 2 3/8" - 20" range, .0001" Resolution dial indicator
      MRP-2002-S Internal Pitch Diameter Gage. 4?” reach, Straight Arms 2?” - 20” dia
      MRP-2002-SEAL Internal Seal Diameter Gage, 0"-4?” reach, 2?” - 20” dia.
      MRP-2003 Internal / External PD Gage, 2?"-20", w/ 4?” reach
      MRP-2003-10 Internal / External PD Gage, Int- 2?"-20", Ext- 3?”-20" w/10” reach
      MRP-2003-7 Internal / External PD Gage, Int- 2?"-20", Ext- 3?”-20" w/ 7” reach
      MRP-2003-S Internal/External Pitch Diameter Gage. 4?” reach, Straight Arms 2?” - 20” dia
      MRP-202 Internal PD Gage, 1.050" - 1.990"
      MRP-20B-B 20” Buttress Rod Style Internal Setting Standard, Box
      MRP-20BL MRP-2000 Block Set
      MRP-20BL-SEAL MRP-2000 Block set for seal
      MRP-20B-P 20” Buttress Rod Style External Setting Standard, Pin
      MRP-20KB MRP-2000 Knob
      MRP-20L-B<JK55 20” 8R LTC Rod Style Internal Setting Standard, Box, less than J-55, K-55
      MRP-20L-B>JK55 20” 8R LTC Rod Style Internal Setting Standard, Box, greater than J-55, K-55
      MRP-20LB-1 MRP-2000 Lower Block w/ 1” Hole
      MRP-20L-P 20” 8R LTC Rod Style External Setting Standard, Pin
      MRP-20LP-B 20" Line Pipe Setting Standard BOX
      MRP-20LP-P 20" Line Pipe Setting Standard PIN
      MRP-20mm Int./Ext. Thread Shoe, 20 mm long
      MRP-20S-B<JK55 20” 8R STC Rod Style Internal Setting Standard, Box, less than J-55, K-55
      MRP-20S-B>JK55 20” 8R STC Rod Style Internal Setting Standard, Box, greater than J-55, K-55
      MRP-20SP MRP-2000 Spring Plunger
      MRP-20S-P 20” 8R STC Rod Style External Setting Standard, Pin
      MRP-20WP MRP-2000 Wear Pad Set
      MRP-20WP-10 MRP-2000 Wear Pad Set, 10” reach
      MRP-20WP-7 MRP-2000 Wear Pad Set, 7” reach
      MRP-20WPEX MRP-2000 Extended Wear Pad Set
      MRP-20WP-SEAL MRP-2002 Slotted Wear Pad Set for Seal Measurements
      MRP-212LP-B 2?" Line Pipe 8 TPI Internal Rod Style Setting Standard
      MRP-212LP-P 2?" Line Pipe 8 TPI External Rod Style Setting Standard
      MRP-21LA MRP-2001 Lower Arm, .740” diameter
      MRP-21LA-10 MRP-2001 10” Lower Arm, .990” diameter
      MRP-21LA-7 MRP-2001 7” Lower Arm, .990” diameter
      MRP-21UA MRP-2001 Upper Arm, .740” diameter
      MRP-21UA-10 MRP-2001 10” Upper Arm, .740” diameter
      MRP-21UA-7 MRP-2001 7” Upper Arm, .740” diameter
      MRP-22LA MRP-2002 Lower Arm, .740” diameter
      MRP-22LA-10 MRP-2002 10” Lower Arm, .990” diameter
      MRP-22LA-7 MRP-2002 7” Lower Arm, .990” diameter
      MRP-22UA MRP-2002 Upper Arm, .740” diameter
      MRP-22UA-10 MRP-2002 10” Upper Arm, .740” diameter
      MRP-22UA-7 MRP-2002 7” Upper Arm, .740” diameter
      MRP-22UA-SEAL MRP-2002 Upper Arm w/ extended tube for seal measurements
      MRP-238EUE-B 2?” EUE Rod Style Internal Setting Standards, 8 Round, Box
      MRP-238EUE-P 2?” EUE Rod Style External Setting Standards, 8 Round, Pin
      MRP-238NUE-B 2?” NUE Rod Style Internal Setting Standards, 10 Round, Box
      MRP-238NUE-P 2?” NUE Rod Style External Setting Standards, 10 Round, Pin
      MRP-238USSIB-B 2?” USS Improved Buttress Rod Style Internal Setting Standard, Box
      MRP-238USSIB-P 2?” USS Improved Buttress Rod Style Internal Setting Standard, Pin
      MRP-25/35-BL MRP-1500, MRP-2500, MRP-3500 Block Set
      MRP-2511 External PD Gage, w/ 4” reach, 4?” - 9?”
      MRP-2511-7 External PD Gage, w/ 7” reach, 4?” - 9?”
      MRP-2512 Internal PD Gage, w/ 3?” reach, 4?” - 9?”
      MRP-2512-10 Internal PD Gage, w/ 10” reach, 4?” - 9?”
      MRP-2512-7 Internal PD Gage, w/ 7” reach, 4?” - 9?”
      MRP-2513 Internal / External PD Gage, w/ 3?” reach, 4?” - 9?”
      MRP-2521 External PD Gage, w/ 4” reach, 4?” - 13?”
      MRP-2522 Internal PD Gage, w/ 3?” reach, 4?” - 13?”
      MRP-2522-10 Internal PD Gage, w/ 3?” reach, 4?” - 13?”, with 12" reach
      MRP-2522-7 Internal PD Gage, w/ 3?” reach, 4?” - 13?”, with 10" reach
      MRP-2523 Internal / External PD Gage, w/ 3?” reach, 4?” - 13?”
      MRP-278EUE-B 2?” EUE Rod Style Internal Setting Standards, 8 Round, Box
      MRP-278EUE-P 2?” EUE Rod Style External Setting Standards, 8 Round, Pin
      MRP-278NUE-B 2?” NUE Rod Style Internal Setting Standards, 10 Round, Box
      MRP-278NUE-P 2?” NUE Rod Style External Setting Standards, 10 Round, Pin
      MRP-278USSIB-B 2?” USS Improved Buttress Rod Style Internal Setting Standard, Box
      MRP-278USSIB-P 2?” USS Improved Buttress Rod Style Internal Setting Standard, Pin
      MRP-2LP-B 2" Line Pipe 11 1/2 TPI Internal Rod Style Setting Standard, Box
      MRP-2LP-P 2" Line Pipe 11 1/2 TPI External Rod Style Setting Standard, Pin
      MRP-3001 External PD Gage, w/ 3?” reach, 8?” - 24”
      MRP-3001-7 External PD Gage, w/ 3?” reach, 8?” - 24”, with 7" reach
      MRP-3002 Internal PD Gage, w/ 3?” reach, 8?” - 24”
      MRP-3002-10 Internal PD Gage, w/ 3?” reach, 8?” - 24”, with 10" reach
      MRP-3002-7 Internal PD Gage, w/ 3?” reach, 8?” - 24”, with 7" reach
      MRP-3003 Internal/External PD Gage, w/ 3?” reach, Internal 8?” - 24”, External 8?” - 24”
      MRP-3003-7 Internal/External PD Gage, w/7” reach, Internal 8?” - 24”, External 8?” - 24”
      MRP-3004 Internal/External PD Gage, w/ 3?” reach, Internal 20” - 36”, External 20” - 36”
      MRP-3004-10 Internal/External PD Gage, w/ 10” reach, Internal 20” - 36”, External 20” - 36”
      MRP-3004-7 Internal/External PD Gage, w/ 7” reach, Internal 20” - 36”, External 20” - 36”
      MRP-30LA MRP-3000 Lower Arm
      MRP-30RS-18 MRP-3000 Rail Set, 18” Max.
      MRP-30RS-24 MRP-3000 Rail Set, 24” Max.
      MRP-30RS-36 MRP-3000 Rail Set, 36” Max.
      MRP-30WP MRP-3000 Wear Pad Set
      MRP-30WPEX MRP-3000 Extended Wear Pad Set
      MRP-312EUE-B 3?” EUE Rod Style Internal Setting Standards, 8 Round, Box
      MRP-312EUE-P 3?” EUE Rod Style External Setting Standards, 8 Round, Pin
      MRP-312LP-B 3?" Line Pipe 8 TPI Internal Rod Style Setting Standard, Box
      MRP-312LP-P 3?" Line Pipe 8 TPI External Rod Style Setting Standard, Pin
      MRP-312NUE-B 3?” NUE Rod Style Internal Setting Standards, 10 Round, Box
      MRP-312NUE-P 3?” NUE Rod Style External Setting Standards, 10 Round, Pin
      MRP-312USSIB-B 3?” USS Improved Buttress Rod Style Internal Setting Standard, Box
      MRP-312USSIB-P 3?” USS Improved Buttress Rod Style Internal Setting Standard, Pin
      MRP-3501 External PD Gage w/ 6?” reach 8?” - 24”
      MRP-3502 Internal PD Gage w/ 6?” reach 8?” - 24”
      MRP-3503 Internal/External PD Gage w/ 6?” reach Internal 8?” - 24”, External 8?” - 24”
      MRP-3LP-B 3" Line Pipe 8 TPI Internal Rod Style Setting Standard, Box
      MRP-3LP-P 3" Line Pipe 8 TPI External Rod Style Setting Standard, Pin
      MRP-412B-B 4?” Buttress Rod Style Internal Setting Standard, Box
      MRP-412B-P 4?” Buttress Rod Style External Setting Standard, Pin
      MRP-412EUE-B 4?” EUE Rod Style Internal Setting Standards, 8 Round, Box
      MRP-412EUE-P 4?” EUE Rod Style External Setting Standards, 8 Round, Pin
      MRP-412L-B 4?” 8R LTC Rod Style Internal Setting Standard, Box
      MRP-412L-P 4?” 8R LTC Rod Style External Setting Standard, Pin
      MRP-412LP-B 4?" Line Pipe 8 TPI Internal Rod Style Setting Standard, Box
      MRP-412LP-P 4?" Line Pipe 8 TPI External Rod Style Setting Standard, Pin
      MRP-412NUE-B 4?” NUE Rod Style Internal Setting Standards, 8 Round, Box
      MRP-412NUE-P 4?” NUE Rod Style External Setting Standards, 8 Round, Pin
      MRP-412S-9-B 4?” - 9.50# 8R STC Rod Style External Setting Standards, Box
      MRP-412S-9-P 4?” - 9.50# 8R STC Rod Style External Setting Standard, Pin
      MRP-412S-O-B 4?” Other 8R STC Rod Style Internal Setting Standard, Box
      MRP-412S-O-P 4?” - Other 8R STC Rod Style External Setting Standard, Pin
      MRP-412USSIB-B 4?” USS Improved Buttress Rod Style Internal Setting Standard, Box
      MRP-412USSIB-P 4?” USS Improved Buttress Rod Style Internal Setting Standard, Pin
      MRP-4EUE-B 4” EUE Rod Style Internal Setting Standards, Box
      MRP-4EUE-P 4” EUE Rod Style External Setting Standards, Pin
      MRP-4LP-B 4" Line Pipe 8 TPI Internal Rod Style Setting Standard, Box
      MRP-4LP-P 4" Line Pipe 8 TPI External Rod Style Setting Standard, Pin
      MRP-4NPT-P 4" NPT Rod Style External Setting Standard
      MRP-4NUE-B 4” NUE Rod Style Internal Setting Standards, 8 Round, Box
      MRP-4NUE-P 4” NUE Rod Style External Setting Standards, 8 Round, Pin
      MRP-4USSIB-B 4” USS Improved Buttress Rod Style Internal Setting Standard, Box
      MRP-4USSIB-P 4” USS Improved Buttress Rod Style Internal Setting Standard, Pin
      MRP-5001 Internal/External Tapered Tubing and Casing 2?” - 5?” connectors, Internal Tool Joints, 3/4" TPF arms included (unless other TPF specified). Thread rolls not included.
      MRP-5002 Internal/External Tapered Tubing and Casing, 2?” - 13?” connectors, Internal Tool Joints, 3/4" TPF arms included (unless other TPF specified). Thread rolls not included.
      MRP-5003 Internal/External Taper Casing, 13?” - 20” connectors, 3/4" TPF arms included (unless other TPF specified). Thread rolls not included.
      MRP-5004 Internal/External Tapered Tubing and Casing, 2?” - 9?” connectors, Internal Tool Joints  Indicator .0001” resolution, 3/4" TPF arms included (unless other TPF specified). Thread rolls not included.
      MRP-5004-M Internal/External Tapered Tubing and Casing, 2?” - 9?” connectors, Internal Tool Joints  Indicator .0005” resolution, Straight arms included with  MPR.625 shoes, set to .875" standoff.
      MRP-501 External Sizes by Taper, Single Taper Gage, One set of rolls included
      MRP-5012 Internal Tunneling Drill Pipe ?” - 2” Diameter - Rolls not included
      MRP-502 Internal Sizes by Taper, Single Taper Gage, One set of rolls included
      MRP5-10 Positioning Springs (Set of 2)
      MRP5-10T 1” TPF Taper Arms (Set of 2)
      MRP5-11 Retainer Washers (Set of 2)
      MRP5-12 Lock Screw (Set of 2)
      MRP5-125T 1?” TPF Taper Arms (Set of 2)
      MRP-512B-B 5?” Buttress Rod Style Internal Setting Standard
      MRP-512B-P 5?” Buttress Rod Style External Setting Standard
      MRP-512L-B 5?” 8R LTC Rod Style Internal Setting Standard
      MRP-512L-P 5?” 8R LTC Rod Style External Setting Standard
      MRP-512S-B 5?” 8R STC Rod Style Internal Setting Standard
      MRP-512S-P 5?” 8R STC Rod Style External Setting Standard
      MRP-512USSIB-B 5?” USS Improved Buttress Rod Style Internal Setting Standard, Box
      MRP-512USSIB-P 5?” USS Improved Buttress Rod Style Internal Setting Standard, Pin
      MRP5-15T 1?” TPF Taper Arms (Set of 2)
      MRP5-20T 2” TPF Taper Arms (Set of 2)
      MRP5-30T 3” TPF Taper Arms (Set of 2)
      MRP-5501 External Tool Joints, 2?” - 4?”
      MRP-5502 External Tool Joints, 4?” - 7?”
      MRP-5503 External Tool Joints, 8?”
      MRP-5512 External Tunneling Drill Pipe ?” - 2” Diameter - Rolls not included
      MRP55-125T 1?” TPF Taper Arm*
      MRP55-15T 1?” TPF Taper Arm*
      MRP55-20T 2” TPF Taper Arm*
      MRP55-30T 3” TPF Taper Arm *
      MRP5-75T ?” TPF Taper Arms (Set of 2)
      MRP5-75T-7 ?” TPF Taper Arms (Set of 2), 7" Length
      MRP-5B-B 5” Buttress Rod Style Internal Setting Standard, Box
      MRP-5B-P 5” Buttress Rod Style External Setting Standard, Pin
      MRP-5L-B 5” 8R LTC Rod Style Internal Setting Standard, Box
      MRP-5L-P 5” 8R LTC Rod Style External Setting Standard, Pin
      MRP-5LP-B 5" Line Pipe 8 TPI Internal Rod Style Setting Standard
      MRP-5LP-P 5" Line Pipe 8 TPI External Rod Style Setting Standard
      MRP-5S-11-B 5” - 11.50# 8R STC Rod Style Internal Setting Standard, Box
      MRP-5S-11-P 5” - 11.50# 8R STC Rod Style External Setting Standard, Pin
      MRP-5S-O-B 5” - Other 8R STC Rod Style Internal Setting Standard, Box
      MRP-5S-O-P 5” - Other 8R STC Rod Style External Setting Standard, Pin
      MRP-658B-B 6?” Buttress Rod Style Internal Setting Standard, Box
      MRP-658B-P 6?” Buttress Rod Style External Setting Standard, Pin
      MRP-658L-B 6?” 8R LTC Rod Style Internal Setting Standard, Box
      MRP-658L-P 6?” 8R LTC Rod Style External Setting Standard, Pin
      MRP-658S-B 6?” 8R STC Rod Style Internal Setting Standard, Box
      MRP-658S-P 6?” 8R STC Rod Style External Setting Standard, Pin
      MRP-6LP-B 6" Line Pipe 8 TPI Internal Rod Style Setting Standard, Box
      MRP-6LP-P 6" Line Pipe 8 TPI External Rod Style Setting Standard, Pin
      MRP-758B-B 7?” Buttress Rod Style Internal Setting Standard, Box
      MRP-758B-P 7?” Buttress Rod Style External Setting Standard, Pin
      MRP-758L-B 7?” 8R LTC Rod Style Internal Setting Standard, Box
      MRP-758L-P 7?” 8R LTC Rod Style External Setting Standard, Pin
      MRP-758S-B 7?” 8R STC Rod Style Internal Setting Standard, Box
      MRP-758S-P 7?” 8R STC Rod Style External Setting Standard, Pin
      MRP-7B-B 7” Buttress Rod Style Internal Setting Standard, Box
      MRP-7B-P 7” Buttress Rod Style External Setting Standard, Pin
      MRP-7L-B 7” 8R LTC Rod Style Internal Setting Standard, Box
      MRP-7L-P 7” 8R LTC Rod Style External Setting Standard, Pin
      MRP-7S-17-B 7” - 17.00# 8R STC Rod Style Internal Setting Standard, Box
      MRP-7S-17-P 7” - 17.00# 8R STC Rod Style External Setting Standard, Pin
      MRP-7S-O-B 7” - Other 8R STC Rod Style Internal Setting Standard, Box
      MRP-7S-O-P 7” - Other 8R STC Rod Style External Setting Standard, Pin
      MRP-858B-B 8?” Buttress Rod Style Internal Setting Standard, Box
      MRP-858B-P 8?” Buttress Rod Style External Setting Standard, Pin
      MRP-858L-B 8?” 8R LTC Rod Style Internal Setting Standard, Box
      MRP-858L-P 8?” 8R LTC Rod Style External Setting Standard, Pin
      MRP-858S-24-B 8?” - 24.00# 8R STC Rod Style Internal Setting Standard, Box
      MRP-858S-24-P 8?” - 24.00# 8R STC Rod Style External Setting Standard, Pin
      MRP-858S-O-B 8?” - Other 8R STC Rod Style Internal Setting Standard, Box
      MRP-858S-O-P 8?” - Other 8R STC Rod Style External Setting Standard, Pin
      MRP-8LP-B 8" Line Pipe 8 TPI Internal Rod Style Setting Standard, Box
      MRP-8LP-P 8" Line Pipe 8 TPI External Rod Style Setting Standard, Pin
      MRP-958B-B 9?” Buttress Rod Style Internal Setting Standard, Box
      MRP-958B-P 9?” Buttress Rod Style External Setting Standard, Pin
      MRP-958L-B<P110 9?” 8R LTC Rod Style Internal Setting Standard, Box, less than P-110
      MRP-958L-B>P110 9?” 8R LTC Rod Style Internal Setting Standard, Box, greater than P110
      MRP-958L-P 9?” 8R LTC Rod Style External Setting Standard, Pin
      MRP-958S-B<P110 9?” 8R STC Rod Style Internal Setting Standard, Box,less than P-110
      MRP-958S-B>P110 9?” 8R STC Rod Style Internal Setting Standard, Box, greater than P-110
      MRP-958S-P 9?” 8R STC Rod Style External Setting Standard, Pin
      MRP-BL-SEAL MRP-1000 BLOCK SET FOR SEAL
      MRP-GSS MRP Gage Setting Stand
      MRP-RAIL-12 MRP-2000 12” Cross Rail (Set of 2)
      MRP-RAIL-18 MRP-2000 18” Cross Rail (Set of 2)
      MRP-RAIL-24 MRP-2000 24” Cross Rail (Set of 2)
      MRP-RAIL-26 MRP-2000 26" Rail Set (Set of 2)
      MRP-RAIL-8 MRP-1000 8” Cross Rail (Set of 2)
      MT-100  12” Special Manual Trac, adjustable setting standard for field or machine shop use. This gage is preset to a required size and locked in position for verifying different indicator gages pre-set values.
      MT-124 24”  Special Manual Trac, adjustable setting standard for field or machine shop use. This gage is preset to a required size and locked in position for verifying different indicator gages pre-set values.
      MT-3012 Cal FL Calibration Force-Lok 12”
      MT-3012 Cal NF Calibration Non Force-Lok 12”
      MT-3012 w/ SLEC File Calibration
      MT-3012-50 MIC TRAC Base Unit w/ DRO and TF-PL Blocks, Internal -0” to12”, External -1?” to 13?” 
      MT-3012F-10-USBC High Resolution MIC TRAC Base Unit w/ Desktop Computer, MT-4-USB, and TF-PL Blocks, Internal - 0” to 12”, External -1?” to 13?” 
      MT-3012F-50 MIC TRAC Base Unit w/ Force-Lok, DRO and TF-PL Blocks, Internal - 0” to 12”, External - 1?” to 13?” 
      MT-3012F-50-USBC MIC TRAC Base Unit w/ Desktop Computer, MT-4-USB, and TF-PL Blocks, Internal - 0” to 12”, External -1?” to 13?” 
      MT-3024 Cal FL Calibration Force-Lok 24”
      MT-3024 Cal NF Calibration Non Force-Lok 24”
      MT-3024 w/ SLEC File Calibration
      MT-3024-50 MIC TRAC Base Unit w/ DRO and TF-PL Blocks, Internal- 0” to 24”, External 1?” to 25?”
      MT-3024F-10-USBC High Resolution MIC TRAC Base Unit w/ Desktop Computer, MT-4-USB, and TF-PL Blocks, Internal- 0” to 24”, External- 1?” to 25?”
      MT-3024F-50 MIC TRAC Base Unit w/ Force-Lok, DRO and TF-PL Blocks, Internal - 0” to 24”, External -1?” to 25?” 
      MT-3024F-50-USBC MIC TRAC Base Unit w/ Desktop Computer, MT-4-USB, and TF-PL Blocks, Internal- 0” to 24”, External- 1?” to 25?”
      MT-3036 Cal FL Calibration Force-Lok 36”
      MT-3036 Cal NF Calibration Non Force-Lok 36”
      MT-3036 w/ SLEC File Calibration
      MT-3036-50 MIC TRAC Base Unit w/ DRO and TF-PL Blocks, Internal- 0” to 36”, External 1?” to 37?” 
      MT-3036F-10-USBC High Resolution MIC TRAC Base Unit w/ Desktop Computer, MT-4-USB, and TF-PL Blocks Internal- 0” to 36”, External- 1?” to 37?” 
      MT-3036F-50 MIC TRAC Base Unit w/ Force-Lok, DRO and TF-PL Blocks, Internal- 0” to 36” External- 1?” to 37?”
      MT-3036F-50-USBC MIC TRAC Base Unit w/ Desktop Computer, MT-4-USB, and TF-PL Blocks Internal- 0” to 36”, External- 1?” to 37?” 
      MT-3048 Cal FL Calibration Force-Lok 48”
      MT-3048 Cal NF Calibration Non Force-Lok 48”
      MT-3048 w/ SLEC File Calibration
      MT-3048-50 MIC TRAC Base Unit w/ DRO and TF-PL Blocks, Internal- 0” to 48”, External  1?” to 49?” 
      MT-3048F-10-USBC High Resolution MIC TRAC Base Unit w/ Desktop Computer, MT-4-USB, and TF-PL Blocks, Internal- 0” to 48”, External- 1?” to 49?”
      MT-3048F-50 MIC TRAC Base Unit w/ Force-Lok, DRO and TF-PL Blocks, Internal- 0” to 48”,  External-1?” to 49?”
      MT-3048F-50-USBC MIC TRAC Base Unit w/ Desktop Computer, MT-4-USB, and TF-PL Blocks, Internal- 0” to 48”, External- 1?” to 49?”
      MT-3060 Cal FL Calibration Force-Lok 60”
      MT-3060 Cal NF Calibration Non Force-Lok 60”
      MT-3060 w/ SLEC File Calibration
      MT-3060-50 MIC TRAC Base Unit w/ DRO and TF-PL Blocks, Internal- 0” to 60”, External- 1?” to 61?”
      MT-3060F-10-USBC High Resolution MIC TRAC Base Unit w/ Desktop Computer, MT-4-USB, and TF-PL Blocks, Internal- 0” to 60”, External- 1?” to 61?”
      MT-3060F-50 MIC TRAC Base Unit w/ Force-Lok, DRO and TF-PL Blocks, Internal- 0” to 60”, External- 1?” to 61?” 
      MT-3060F-50-USBC MIC TRAC Base Unit w/ Desktop Computer, MT-4-USB, and TF-PL Blocks, Internal- 0” to 60”, External- 1?” to 61?”
      MT-3090F-10-USBC MIC TRAC Base Unit w/ Desktop Computer, MT-4-USB, and TF-PL Blocks, Internal- 0” to 90”,  External- 1?” to 61?”, Scale .00025um
      MT-4012 Calibration 12”
      MT-4012-10 MIC TRAC Base Unit w/ digital readout software, desktop computer, andTF-2R Blocks, Internal- 0” to12”, External- 1?” to 13?” 
      MT-4024 Calibration 24”
      MT-4024-10 MIC TRAC Base Unit w/ digital readout software, desktop computer, and TF-2R Blocks Internal- 0” to 24”, External- 1?” to 25?”
      MT-4036 Calibration 36”
      MT-4036-10 MIC TRAC Base Unit w/ digital readout software, desktop computer, and TF-2R Blocks, Internal- 0” to 36”, External- 1?” to 37?”
      MT-4048 Calibration 48”
      MT-4048-10 MIC TRAC Base Unit w/ digital readout software, desktop computer, and TF-2R Blocks, Internal- 0” to 48”, External-  1?” to 49?” 
      MT-4-USB w/software Digital readout software module with digital data acquisition card. Includes CERTIFI software.
      MT-CAK Coarse adjustment knob
      MT-CALL Coarse adjustment locking lever 
      MT-CPU-H                               MT-3000 CPU Holder
      MT-DRO-F MT-3000 Series Digital Readout Force-Lok
      MT-DRO-N MT-3000 Series Digital Readout Non-Force-Lok
      MT-FABearing Bearing for the fine adjustment (.5 od 2 2.5 id x .187 wide ball bearing)  
      MT-FAK Fine adjust knob 
      MT-FALK Fine adjust lock knob, 3/4" diameter knurled
      MT-FALL Fine adjustment locking lever   
      MT-LOADCELL MIC TRAC ForceLok Load Cell (replacement)
      MT-Ujoint U-joint  for the fine adjust 
      OG-9801 Special ovality gage for tubular products. Range 2" - 6", 3-Point contact, two sets of rollers and indicator w/ roller contact.
      OG-9802 Special ovality gage for tubular products. Range 6" - 10", 3-Point contact, two sets of rollers and indicator w/ roller contact .
      OG-9803 Special ovality gage for tubular products. Range 10" - 14", 3-Point contact, two sets of rollers and indicator w/ roller contact .
      OI-3.5-2-H90-50X Special thread insert overlay inspection chart with tolerance limits of .0005" and 50x magnification. 3.5-2-H90
      OI-3.5-3-H90-50X Special thread insert overlay inspection chart with tolerance limits of .0005" and 50x magnification.  3.5-3-H90
      OI-3-1.25-H90-50X Special thread insert overlay inspection chart with tolerance limits of .0005" and 50x magnification.  3-1.25-H90
      OI-4-2-V038-50X Special thread insert overlay inspection chart with tolerance limits of .0005" and 50x magnification. 4-2-V038
      OI-4-2-V050-50X Special thread insert overlay inspection chart with tolerance limits of .0005" and 50x magnification. 4-2-V050
      OI-4-3-V038-50X Special thread insert overlay inspection chart with tolerance limits of .0005" and 50x magnification. 4-3-V038
      OI-4-3-V050-50X Special thread insert overlay inspection chart with tolerance limits of .0005" and 50x magnification. 4-3-V050
      OI-5-3-V040-50X Special thread insert overlay inspection chart with tolerance limits of .0005" and 50x magnification. 5-3-V040
      Overlay Overlays
      P-500 TH-3001R, Flat Face Contact
      PA-30 30° Point adapter
      PA-45 45° Point adapter
      PD-3000B Pit Depth Gage BASE ONLY
      PD-3000BF Pit Depth Gage Flat BASE ONLY
      PD-3000BF-10 Pit Depth Gage 10” Wide Flat BASE ONLY
      PD-3000BF-6 Pit Depth Gage 6” Wide Flat BASE ONLY
      PD-3000BV Pit Depth Gage V BASE ONLY
      PD-3000BV-6 Pit Depth Gage 6” Wide V BASE ONLY
      PD-3003 Pit Depth Gage, AGD #1, 0-100
      PD-3004 Pit Depth Gage, AGD #2, 0-100
      PD-3005 Pit Depth Gage w/ flat base, AGD #2, 0-100
      PD-3006 Pit Depth Gage w/ 6” long flat base, AGD #2, 0-100
      PD-3007 Pit Depth Gage w/ 6” long V base, AGD #2, 0-100
      PD-6000 Internal pitch diameter gage (“V” & ACME) 1?” to 9”
      PD-6000-02 Replacement arm set 2?” length
      PD-6000-07 Replacement arm set 4?” length
      PD-6000-1 Internal pitch diameter gage (“V” & ACME) 1?” to 9”, .0001" Res. Indicator
      PD-6001 Internal pitch diameter gage 6” to 24”
      PD-6001-1 Internal pitch diameter gage 6” to 24”, .0001" Res. Indicator
      PD-6001-12E Internal pitch diameter gage extension rod 12” length
      PD-6001-24E Internal pitch diameter gage extension rod 24” length
      PD-6001-36E Internal pitch diameter gage extension rod 36” length
      PD-6001-CBA PD-6001 Cap and Base Assembly
      PD-6001-PD1 Contact point adapter
      PD-6001-PD2 Adjustment cap
      PD-6001-PD3 Adjustment cap lock nut
      PD-6001-PD4C Cap - CDI Indicator
      PD-6001-PD4M Cap - Mitutoyo Indicator
      PD-6001-PDA Extension rod .430”
      PD-6001-PDB Extension rod .860”
      PD-6001-PDC Extension rod 1.290”
      PD-6001-PDD Extension rod 1.720”
      PD-6001-PDE Extension rod 3.440”
      PD-6001-PDF Extension rod 5.590”
      PD-6001-PDG Extension rod 7.740”
      PD-6001-PDH Extension rod 10.320”
      PD-6002 Internal pitch diameter gage 9” to 27”, Travel- 2", Resolution- .001"
      PD-8000    External ball pitch diameter gage 0” to 2?”
      PD-8000-1 External ball pitch diameter gage 0” to 2?”, .0001" Res. Indicator
      PD-8000-2-11 PD-8000 11" Long Extension Arm, provides 8" diameter adjustment
      PD-8000-CAL Calibration
      PD-8001 External ball pitch diameter gage 0” to 6”
      PD-8001-1 External ball pitch diameter gage 0” to 6”, .0001" Res. Indicator
      PD-8001-RSC Pin Rotary Shoulder pitch diameter gage 0” - 6”  w/ Electronic .500" travel dial indicator
      PD-8002 External ball pitch diameter gage 6” to 12”
      PD-8002-1 External ball pitch diameter gage 6” to 12”, .0001" Res. Indicator
      PD-8002-RSC Pin Rotary Shoulder pitch diameter gage 6” - 12”  w/ Electronic .500" travel dial indicator
      PD-8004 External ball pitch diameter gage 12” to 16”
      PD-8004-1 External ball pitch diameter gage 12” to 16”, .0001" Res. Indicator
      PD-8006 External ball pitch diameter gage 16” to 20”
      PD-8006-1 External ball pitch diameter gage 16” to 20”, .0001" Res. Indicator
      PD-8008 External ball pitch diameter gage 20” to 24”
      PD-8008-1 External ball pitch diameter gage 20” to 24”, .0001" Res. Indicator
      PD-8010 External ball pitch diameter gage 24” to 28”
      PD-8010-1 External ball pitch diameter gage 24” to 28”, .0001" Res. Indicator
      PD-8012 External ball pitch diameter gage 28” to 36”
      PD-8012-1 External ball pitch diameter gage 28” to 36”, .0001" Res. Indicator
      PD-8013 External ball pitch diameter gage 36” to 44”
      PD-8013-1 External ball pitch diameter gage 36” to 44”, .0001" Res. Indicator
      PD-8014 External ball pitch diameter gage 44” to 52”
      PD-8014-1 External ball pitch diameter gage 44” to 52”, .0001" Res. Indicator
      PD-8015 External ball pitch diameter gage 52” to 60”
      PD-8015-1 External ball pitch diameter gage 52” to 60”, .0001" Res. Indicator
      PD-8016 External ball pitch diameter gage 60” to 72”
      PD-8016-1 External ball pitch diameter gage 60” to 72”, .0001" Res. Indicator
      PD-BX Setting BX/BXG Gage, 1/2” x 1/2” U-notch
      PE-.300 Point extensions .300”
      PE-.500 Point extensions .500”
      PE-.750 Point extensions .750”
      PE-1.00 Point extensions 1.000”
      PE-1.250 Point extensions 1.250”
      PEL-1400 Pelican case 12?” X 9?” X 5?”
      PEL-1450 Pelican case 15” X 10?” X 6”
      PEL-1500 Pelican case 17?” X 11?” X 6?”
      PEL-1550 Pelican case 19?” X 13?” X 7?”
      PEL-1600 Pelican case 22” X 17” X 8”
      PEL-1700 Pelican case 36” X 13?” X 5”
      PEL-1750 Pelican case 50?” X 13?” X 5”
      PG-6000 Internal thread roll gage 1?” to 9”
      PG-6000-1 Internal thread roll gage 1?” to 9”, .0001" Res. Indicator
      PG-6000-17 Locking T-nut for arms
      PG-6000-1w/XA  Internal functional roll gage with 4 ?” reach arms, .0001" Res. Indicator
      PG-6000-SA Replacement arm set 2?” reach
      PG-6000w/XA   Internal functional roll gage with 4 ?” reach arms.
      PG-6000-XA Extended reach arm set 4?” reach
      PG-6001 Internal thread roll gage 9” to 16”
      PG-6001-1 Internal thread roll gage 9” to 16”, .0001" Res. Indicator
      PG-6002 Internal thread roll gage 16” to 24”
      PG-6002-1 Internal thread roll gage 16” to 24”, .0001" Res. Indicator
      PG-6003 Internal Thread roll gage 24” to 32”
      PG-6003-1 Internal Thread roll gage 24” to 32”, .0001" Res. Indicator
      PGC-12-W2 Precision Calibration Package: MT-4012-10, CAL-PAK, Card Set, CRC, TF-2R, TF-XYT, computer, CERTIFI, TDWIN, AWH-100, torque wrench, and shipping container
      PGC-24-W2 Precision Calibration Package: MT-4024-10, CAL-PAK, Card Set, CRC, TF-2R, TF-XYT, computer, CERTIFI, TDWIN, AWH-100, torque wrench, and shipping container
      PGC-36-W2 Precision Calibration Package: MT-4036-10, CAL-PAK, Card Set, CRC, TF-2R, TF-XYT, computer, CERTIFI, TDWIN, AWH-100, torque wrench, and shipping container
      PGC-48-W2 Precision Calibration Package: MT-4048-10, CAL-PAK, Card Set, CRC, TF-2R, TF-XYT, computer, CERTIFI, TDWIN, AWH-100, torque wrench, and shipping container
      PG-LTRP-12 Lower Thread Roll Pin for the PG-6000 with washer and screw
      PG-UTRP-7  Upper Thread Roll Pin for the PG-6000 with washer and screw
      PN-3000/T.04087 Pin Seal Standoff Plate, 0.04087” (1.038 mm) thick
      PN-3000/T.044 Pin Seal Standoff Plate, 0.0440” (1.12 mm) thick
      PN-3000/T.0472 Pin Seal Standoff Plate, 0.0472” (1.20 mm) thick
      PN-3000/T.0591 Pin Seal Standoff Plate, 0.0591” (1.50 mm) thick
      PN-3000/T.064 Pin Seal Standoff Plate, 0.0640” (1.62 mm) thick
      PN-3000/T.072 Pin Seal Standoff Plate, 0.0720” (1.83 mm) thick
      PN-3000/T.0748 Pin Seal Standoff Plate, 0.0748” (1.90 mm) thick
      PN-3000/T.078 Pin Seal Standoff Plate, 0.0780” (1.9812 mm) thick
      PN-3000/T.0787 Pin Seal Standoff Plate, 0.0787” (2.00 mm) thick
      PN-3000/T.0811 Pin Seal Standoff Plate, 0.0811” (2.06 mm) thick
      PN-3000/T.0815 Pin Seal Standoff Plate, 0.0815” (2.07 mm) thick
      PN-3000/T.094 Pin Seal Standoff Plate, 0.0940” (2.39” mm) thick
      PN-3000/T.100 Pin Seal Standoff Plate, 0.1000” (2.54 mm) thick
      PN-3000/T.114 Pin Seal Standoff Plate, 0.1140” (2.90 mm) thick
      PN-3000/T.1181 Pin Seal Standoff Plate, 0.1181” (3.00 mm) thick
      PN-3000/T.121 Pin Seal Standoff Plate, 0.1210” (3.07 mm) thick
      PN-3000/T.122 Pin Seal Standoff Plate, 0.1220” (3.10 mm) thick
      PN-3000/T.1221 Pin Seal Standoff Plate, 0.1221” (3.10 mm) thick
      PN-3000/T.1378 Pin Seal Standoff Plate, 0.1378” (3.50 mm) thick
      PN-3000/T.171 Pin Seal Standoff Plate, 0.1710” (4.34 mm) thick
      PN-3000/T.1969 Pin Seal Standoff Plate, 0.1969” (5.00 mm) thick
      PN-3000/T.200 Pin Seal Standoff Plate, 0.2000” (5.08 mm) thick
      PN-3000/T.3149 Pin Seal Standoff Plate, 0.3149” (8.00 mm) thick
      PN-3000/T.350 Pin Seal Standoff Plate, 0.3500” (8.89 mm) thick
      PN-3001 Pin Nose Diameter Gage, (0” - 5.50”),  customer to supply standoff and contact point diameter information prior to production of gage
      PN-3002 Pin Nose Diameter Gage, (0” - 9.50”),  customer to supply standoff and contact point diameter information prior to production of gage
      PN-3003 Pin Nose Diameter Gage, (0” - 13.50”),  customer to supply standoff and contact point diameter information prior to production of gage
      PN-3004 Pin Nose Diameter Gage, up to 19.50", customer to supply standoff and contact point diameter information prior to production of gage
      PN-3005 Pin Nose Diameter Gage, up to 24", customer to supply standoff and contact point information prior to production of gage
      PN-3005 Pin Nose Diameter Gage, up to 24", customer to supply standoff and contact point information prior to production of gage
      PN-3006 Pin Nose Diameter Gage, 24"-36", customer to supply standoff and contact point information prior to production of gage
      PN-31VM-30 30° Internal/External Apex Seal Diameter “V”, Int. 2?” - 6?”/ Ext. 4” - 6?”
      PN-33VM-30 30° Internal/External Apex Seal Diameter “V”, Int. 2?” - 14”/ Ext. 4” - 14” Ext
      PN-33VM-30-2 Upper Anvil
      PN-33VM-30-3 Lower Anvil
      PNA-3001 30° External Apex Diameter Gage,  Anvils 2” - 4?”
      PNA-3001-VMA 30° External Apex Diameter Gage,  Anvils 2” - 4?”
      PNA-3002 30° External Apex Diameter Gage,  Anvils 2” - 9?”
      PNA-3002-VMA 30° External Apex Diameter Gage,  Anvils 2” - 9?”
      PNA-3003 30° External Apex Diameter Gage,  Anvils 2” - 13?”
      PNA-3003-VMA 30° External Apex Diameter Gage,  Anvils 2” - 13?”
      PNA-3003-VMA-2 Upper Anvil
      PNA-3003-VMA-3 Lower Anvil
      PNI-3001 Internal “Ball Contact” Seal Diameter Gage 2” - 5?”, customer to supply standoff and contact point information prior to production of gage
      PNI-3001-VMB Internal “Ball Contact” Seal Diameter Gage 2” - 5?”, customer to supply standoff and contact point information prior to production of gage
      PNI-3002 Internal “Ball Contact” Seal Diameter Gage 2” - 9?”, customer to supply standoff and contact point information prior to production of gage
      PNI-3002-VMB Internal “Ball Contact” Seal Diameter Gage 2” - 9?”, customer to supply standoff and contact point information prior to production of gage
      PNI-3003 Internal “Ball Contact” Seal Diameter Gage, 2” - 13?”, customer to supply standoff and contact point information prior to production of gage
      PNI-3003-VMB Internal “Ball Contact” Seal Diameter Gage, 2” - 13?”, customer to supply standoff and contact point information prior to production of gage
      PNI-3004 Internal "Ball Contact" Seal Diameter Gage, 2" - 20" range.  Customer to provide standoff and contact point selection.
      PNI-3004-VMB Internal “Ball Contact” Seal Diameter Gage, 2” – 20”, customer to supply standoff and contact point information prior to production of gage
      PNS-3000 Pin Nose Gage Setting Standard, 2” - 13?”
      Profile Gage Calibration
      PT-4000 Power Tight Make-up Gage
      RC-375 .375” Dia. Roller Contact
      RG-7000 External thread roll gage ?” to 4”
      RG-7000, PG-6000 Thread Roll Gage calibration
      RG-7000-1 External thread roll gage ?” to 4”, .0001" Res. Indicator
      RG-7001 External thread roll gage 4” to 8”
      RG-7001-1 External thread roll gage 4” to 8”, .0001" Res. Indicator
      RG-7002 External thread roll gage 8” to 12”
      RG-7002-1 External thread roll gage 8” to 12”, .0001" Res. Indicator
      RG-7003 External thread roll gage 12” to 16”
      RG-7003-1 External thread roll gage 12” to 16”, .0001" Res. Indicator
      RG-7004 External thread roll gage 16” to 20”
      RG-7004-1 External thread roll gage 16” to 20”, .0001" Res. Indicator
      RG-7005 External thread roll gage 20” to 24”
      RG-7005-1 External thread roll gage 20” to 24”, .0001" Res. Indicator
      RG-7006 External thread roll gage 24" to 28”
      RG-7006-1 External thread roll gage 24" to 28”, .0001" Res. Indicator
      RG-LAA Lower Adjustment Arm for RG-7000
      RP-250-344 R-RX Groove Profile R 20
      RP-310-469 R-RX Groove Profile R23 to R45, R49, R53, R57, R65, R69, R82, R84, & R99
      RP-380-531 R-RX Groove Profile R46, R73, R85, 
      RP-440-656 R-RX Groove Profile R50, R54, R66, R86, R87
      RP-500-781 R-RX Groove Profile R47, R70, R74, R88
      RP-560-906 R-RX Groove Profile R90
      RP-620-1063 R-RX Groove Profile R63
      RP-690-1313 R-RX Groove Profile R91
      RS-1.0-REG-B Rod Standard for Rotary Shoulder Connection, Box, 1.0 Regular
      RS-1.0-REG-P Rod Standard for Rotary Shoulder Connection, Pin, 1.0 Regular
      RS-1.5-REG-B Rod Standard for Rotary Shoulder Connection, Box, 1.5 Regular
      RS-1.5-REG-P Rod Standard for Rotary Shoulder Connection, Pin, 1.5 Regular
      RS-2.375-EF-B Rod Standard for Rotary Shoulder Connection, Box, 2.375 External Flush
      RS-2.375-EF-P Rod Standard for Rotary Shoulder Connection, Pin, 2.375 External Flush
      RS-2.375-IF-B Rod Standard for Rotary Shoulder Connection, Box, 2.375 Internal Flush
      RS-2.375-IF-P Rod Standard for Rotary Shoulder Connection, Pin, 2.375 Internal Flush
      RS-2.375-OH-B Rod Standard for Rotary Shoulder Connection, Box, 2.375 Open Hole
      RS-2.375-OH-P Rod Standard for Rotary Shoulder Connection, Pin, 2.375 Open Hole
      RS-2.375-PAC-B Rod Standard for Rotary Shoulder Connection, Box, 2.375 PAC
      RS-2.375-PAC-P Rod Standard for Rotary Shoulder Connection, Pin, 2.375 PAC
      RS-2.375-REG-B Rod Standard for Rotary Shoulder Connection, Box, 2.375 Regular
      RS-2.375-REG-P Rod Standard for Rotary Shoulder Connection, Pin, 2.375 Regular
      RS-2.375-SH-B Rod Standard for Rotary Shoulder Connection, Box, 2.375 Slim Hole
      RS-2.375-SH-P Rod Standard for Rotary Shoulder Connection, Pin, 2.375 Slim Hole
      RS-2.375-SLH9-B Rod Standard for Rotary Shoulder Connection, Box, 2.375 Slimline H-90
      RS-2.375-SLH9-P Rod Standard for Rotary Shoulder Connection, Pin, 2.375 Slimline H-90
      RS-2.375-WO-B Rod Standard for Rotary Shoulder Connection, Box, 2.375 Wide Open
      RS-2.375-WO-P Rod Standard for Rotary Shoulder Connection, Pin, 2.375 Wide Open
      RS-2.875-EF-B Rod Standard for Rotary Shoulder Connection, Box, 2.875 External Flush
      RS-2.875-EF-P Rod Standard for Rotary Shoulder Connection, Pin, 2.875 External Flush
      RS-2.875-FH-B Rod Standard for Rotary Shoulder Connection, Box, 2.875 Full Hole
      RS-2.875-FH-P Rod Standard for Rotary Shoulder Connection, Pin, 2.875 Full Hole
      RS-2.875-IF-B Rod Standard for Rotary Shoulder Connection, Box, 2.875 Internal Flush
      RS-2.875-IF-P Rod Standard for Rotary Shoulder Connection, Pin, 2.875 Internal Flush
      RS-2.875-OH-B Rod Standard for Rotary Shoulder Connection, Box, 2.875 Open Hole
      RS-2.875-OH-P Rod Standard for Rotary Shoulder Connection, Pin, 2.875 Open Hole
      RS-2.875-PAC-B Rod Standard for Rotary Shoulder Connection, Box, 2.875 PAC
      RS-2.875-PAC-P Rod Standard for Rotary Shoulder Connection, Pin, 2.875 PAC
      RS-2.875-REG-B Rod Standard for Rotary Shoulder Connection, Box, 2.875 Regular
      RS-2.875-REG-P Rod Standard for Rotary Shoulder Connection, Pin, 2.875 Regular
      RS-2.875-SH-B Rod Standard for Rotary Shoulder Connection, Box, 2.875 Slim Hole
      RS-2.875-SH-P Rod Standard for Rotary Shoulder Connection, Pin, 2.875 Slim Hole
      RS-2.875-SLH9-B Rod Standard for Rotary Shoulder Connection, Box, 2.875 Slimline H-90
      RS-2.875-SLH9-P Rod Standard for Rotary Shoulder Connection, Pin, 2.875 Slimline H-90
      RS-2.875-WO-B Rod Standard for Rotary Shoulder Connection, Box, 2.875 Wide Open
      RS-2.875-WO-P Rod Standard for Rotary Shoulder Connection, Pin, 2.875 Wide Open
      RS-2.875-XH-B Rod Standard for Rotary Shoulder Connection, Box, 2.875 eXtraHole
      RS-2.875-XH-P Rod Standard for Rotary Shoulder Connection, Pin, 2.875 eXtra Hole
      RS-3.5-DS-B Rod Standard for Rotary Shoulder Connection, Box, 3.5 Double Streamline
      RS-3.5-DS-P Rod Standard for Rotary Shoulder Connection, Pin, 3.5 Double Streamline
      RS-3.5-EF-B Rod Standard for Rotary Shoulder Connection, Box, 3.5 External Flush
      RS-3.5-EF-P Rod Standard for Rotary Shoulder Connection, Pin, 3.5 External Flush
      RS-3.5-FH-B Rod Standard for Rotary Shoulder Connection, Box, 3.5 Full Hole
      RS-3.5-FH-P Rod Standard for Rotary Shoulder Connection, Pin, 3.5 Full Hole
      RS-3.5-H9-B Rod Standard for Rotary Shoulder Connection, Box, 3.5 H-90
      RS-3.5-H9-P Rod Standard for Rotary Shoulder Connection, Pin, 3.5 H-90
      RS-3.5-IF-B Rod Standard for Rotary Shoulder Connection, Box, 3.5 Internal Flush
      RS-3.5-IF-P Rod Standard for Rotary Shoulder Connection, Pin, 3.5 Internal Flush
      RS-3.5-OH-B Rod Standard for Rotary Shoulder Connection, Box, 3.5 Open Hole
      RS-3.5-OH-P Rod Standard for Rotary Shoulder Connection, Pin, 3.5 Open Hole
      RS-3.5-PAC-B Rod Standard for Rotary Shoulder Connection, Box, 3.5 PAC
      RS-3.5-PAC-P Rod Standard for Rotary Shoulder Connection, Pin, 3.5 PAC
      RS-3.5-REG-B Rod Standard for Rotary Shoulder Connection, Box, 3.5 Regular
      RS-3.5-REG-P Rod Standard for Rotary Shoulder Connection, Pin, 3.5 Regular
      RS-3.5-SH-B Rod Standard for Rotary Shoulder Connection, Box, 3.5 Slim Hole
      RS-3.5-SH-P Rod Standard for Rotary Shoulder Connection, Pin, 3.5 Slim Hole
      RS-3.5-SLH9-B Rod Standard for Rotary Shoulder Connection, Box, 3.5 Slimline H-90
      RS-3.5-SLH9-P Rod Standard for Rotary Shoulder Connection, Pin, 3.5 Slimline H-90
      RS-3.5-WO-B Rod Standard for Rotary Shoulder Connection, Box, 3.5 Wide Open
      RS-3.5-WO-P Rod Standard for Rotary Shoulder Connection, Pin, 3.5 Wide Open
      RS-3.5-XH-B Rod Standard for Rotary Shoulder Connection, Box, 3.5 eXtra Hole
      RS-3.5-XH-P Rod Standard for Rotary Shoulder Connection, Pin, 3.5 eXtra Hole
      RS-4.5-DS-B Rod Standard for Rotary Shoulder Connection, Box, 4.5 Double Streamline
      RS-4.5-DS-P Rod Standard for Rotary Shoulder Connection, Pin, 4.5 Double Streamline
      RS-4.5-EF-B Rod Standard for Rotary Shoulder Connection, Box, 4.5 External Flush
      RS-4.5-EF-P Rod Standard for Rotary Shoulder Connection, Pin, 4.5 External Flush
      RS-4.5-FH-B Rod Standard for Rotary Shoulder Connection, Box, 4.5 Full Hole
      RS-4.5-FH-P Rod Standard for Rotary Shoulder Connection, Pin, 4.5 Full Hole
      RS-4.5-H9-B Rod Standard for Rotary Shoulder Connection, Box, 4.5 H-90
      RS-4.5-H9-P Rod Standard for Rotary Shoulder Connection, Pin, 4.5 H-90
      RS-4.5-IF-B Rod Standard for Rotary Shoulder Connection, Box, 4.5 Internal Flush
      RS-4.5-IF-P Rod Standard for Rotary Shoulder Connection, Pin, 4.5 Internal Flush
      RS-4.5-OH-B Rod Standard for Rotary Shoulder Connection, Box, 4.5 Open Hole
      RS-4.5-OH-P Rod Standard for Rotary Shoulder Connection, Pin, 4.5 Open Hole
      RS-4.5-REG-B Rod Standard for Rotary Shoulder Connection, Box, 4.5 Regular
      RS-4.5-REG-P Rod Standard for Rotary Shoulder Connection, Pin, 4.5 Regular
      RS-4.5-SH-B Rod Standard for Rotary Shoulder Connection, Box, 4.5 Slim Hole
      RS-4.5-SH-P Rod Standard for Rotary Shoulder Connection, Pin, 4.5 Slim Hole
      RS-4.5-WO-B Rod Standard for Rotary Shoulder Connection, Box, 4.5 Wide Open
      RS-4.5-WO-P Rod Standard for Rotary Shoulder Connection, Pin, , 4.5 Wide Open
      RS-4.5-XH-B Rod Standard for Rotary Shoulder Connection, Box, 4.5 eXtra Hole
      RS-4.5-XH-P Rod Standard for Rotary Shoulder Connection, Pin, 4.5 eXtra Hole
      RS-4-DS-B Rod Standard for Rotary Shoulder Connection, Box, 4 Double Streamline
      RS-4-DS-P Rod Standard for Rotary Shoulder Connection, Pin, 4 Double Streamline
      RS-4-FH-B Rod Standard for Rotary Shoulder Connection, Box, 4 Full Hole
      RS-4-FH-P Rod Standard for Rotary Shoulder Connection, Pin, 4 Full Hole
      RS-4-H9-B Rod Standard for Rotary Shoulder Connection, Box, 4 H-90
      RS-4-H9-P Rod Standard for Rotary Shoulder Connection, Pin, 4 H-90
      RS-4-IF-B Rod Standard for Rotary Shoulder Connection, Box, 4 Internal Flush
      RS-4-IF-P Rod Standard for Rotary Shoulder Connection, Pin, 4 Internal Flush
      RS-4-OH-B Rod Standard for Rotary Shoulder Connection, Box, 4 Open Hole
      RS-4-OH-P Rod Standard for Rotary Shoulder Connection, Pin, 4 Open Hole
      RS-4-SH-B Rod Standard for Rotary Shoulder Connection, Box, 4 Slim Hole
      RS-4-SH-P Rod Standard for Rotary Shoulder Connection, Pin, 4 Slim Hole
      RS-4-WO-B Rod Standard for Rotary Shoulder Connection, Box, 4 Wide Open
      RS-4-WO-P Rod Standard for Rotary Shoulder Connection, Pin, 4 Wide Open
      RS-5.5-DS-B Rod Standard for Rotary Shoulder Connection, Box, 5.5 Double Streamline
      RS-5.5-DS-P Rod Standard for Rotary Shoulder Connection, Pin, 5.5 Double Streamline
      RS-5.5-FH-B Rod Standard for Rotary Shoulder Connection, Box, 5.5 Full Hole
      RS-5.5-FH-P Rod Standard for Rotary Shoulder Connection, Pin, 5.5 Full Hole
      RS-5.5-H9-B Rod Standard for Rotary Shoulder Connection, Box, 5.5 H-90
      RS-5.5-H9-P Rod Standard for Rotary Shoulder Connection, Pin, 5.5 H-90
      RS-5.5-IF-B Rod Standard for Rotary Shoulder Connection, Box, 5.5 Internal Flush
      RS-5.5-IF-P Rod Standard for Rotary Shoulder Connection, Pin, 5.5 Internal Flush
      RS-5.5-REG-B Rod Standard for Rotary Shoulder Connection, Box, 5.5 Regular
      RS-5.5-REG-P Rod Standard for Rotary Shoulder Connection, Pin, 5.5 Regular
      RS-5-H9-B Rod Standard for Rotary Shoulder Connection, Box, 5 H-90
      RS-5-H9-P Rod Standard for Rotary Shoulder Connection, Pin, 5 H-90
      RS-5-XH-B Rod Standard for Rotary Shoulder Connection, Box, 5 eXtra Hole
      RS-5-XH-P Rod Standard for Rotary Shoulder Connection, Pin, 5 eXtra Hole
      RS-6.625-FH-B Rod Standard for Rotary Shoulder Connection, Box, 6.625 Full Hole
      RS-6.625-FH-P Rod Standard for Rotary Shoulder Connection, Pin, 6.625 Full Hole
      RS-6.625-H9-B Rod Standard for Rotary Shoulder Connection, Box, 6.625 H-90
      RS-6.625-H9-P Rod Standard for Rotary Shoulder Connection, Pin, 6.625 H-90
      RS-6.625-IF-B Rod Standard for Rotary Shoulder Connection, Box, 6.625 Internal Flush
      RS-6.625-IF-P Rod Standard for Rotary Shoulder Connection, Pin, 6.625 Internal Flush
      RS-6.625-REG-B Rod Standard for Rotary Shoulder Connection, Box, 6.625 Regular
      RS-6.625-REG-P Rod Standard for Rotary Shoulder Connection, Pin, 6.625 Regular
      RS-7.625-H9-B Rod Standard for Rotary Shoulder Connection, Box, 7.625 H-90
      RS-7.625-H9-P Rod Standard for Rotary Shoulder Connection, Pin, 7.625 H-90
      RS-7.625-REG-B Rod Standard for Rotary Shoulder Connection, Box, 7.625 Regular
      RS-7.625-REG-P Rod Standard for Rotary Shoulder Connection, Pin, 7.625 Regular
      RS-7-H9-B Rod Standard for Rotary Shoulder Connection, Box, 7 H-90
      RS-7-H9-P Rod Standard for Rotary Shoulder Connection, Pin, 7 H-90
      RS-8.625-H9-B Rod Standard for Rotary Shoulder Connection, Box, 8.625 H-90
      RS-8.625-H9-P Rod Standard for Rotary Shoulder Connection, Pin, 8.625 H-90
      RS-8.625-REG-B Rod Standard for Rotary Shoulder Connection, Box, 8.625 Regular
      RS-8.625-REG-P Rod Standard for Rotary Shoulder Connection, Pin, 8.625 Regular
      RSG-16 Rotor Saddle Gage with 2" wide by 16" long wear plates and 3 support braces.  Indicator mounting center and one end.
      RSG-24 Rotor Saddle Gage with 2" wide by 24" long wear plates and 4 support braces.  Indicator mounting center and one end.
      RSG-7 Rotor Saddle Gage with 2" wide by 7" long wear plates and 3 support braces.  Indicator mounting center and one end.
      RS-NC10-B Rod Standard for Rotary Shoulder Connection, Box, NC #10
      RS-NC10-P Rod Standard for Rotary Shoulder Connection, Pin, NC #10
      RS-NC12-B Rod Standard for Rotary Shoulder Connection, Box, NC #12
      RS-NC12-P Rod Standard for Rotary Shoulder Connection, Pin, NC #12
      RS-NC13-B Rod Standard for Rotary Shoulder Connection, Box, NC #13
      RS-NC13-P Rod Standard for Rotary Shoulder Connection, Pin, NC #13
      RS-NC16-B Rod Standard for Rotary Shoulder Connection, Box, NC #16
      RS-NC16-P Rod Standard for Rotary Shoulder Connection, Pin, NC #16
      RS-NC23-B Rod Standard for Rotary Shoulder Connection, Box, NC #23
      RS-NC23-P Rod Standard for Rotary Shoulder Connection, Pin, NC #23
      RS-NC26-B Rod Standard for Rotary Shoulder Connection, Box, NC #26
      RS-NC26-P Rod Standard for Rotary Shoulder Connection, Pin, NC #26
      RS-NC31-B Rod Standard for Rotary Shoulder Connection, Box, NC #31
      RS-NC31-P Rod Standard for Rotary Shoulder Connection, Pin, NC #31
      RS-NC35-B Rod Standard for Rotary Shoulder Connection, Box, NC #35
      RS-NC35-P Rod Standard for Rotary Shoulder Connection, Pin, NC #35
      RS-NC38-B Rod Standard for Rotary Shoulder Connection, Box, NC #38
      RS-NC38-P Rod Standard for Rotary Shoulder Connection, Pin, NC #38
      RS-NC40-B Rod Standard for Rotary Shoulder Connection, Box, NC #40
      RS-NC40-P Rod Standard for Rotary Shoulder Connection, Pin, NC #40
      RS-NC44-B Rod Standard for Rotary Shoulder Connection, Box, NC #44
      RS-NC44-P Rod Standard for Rotary Shoulder Connection, Pin, NC #44
      RS-NC46-B Rod Standard for Rotary Shoulder Connection, Box, NC #46
      RS-NC46-P Rod Standard for Rotary Shoulder Connection, Pin, NC #46
      RS-NC50-B Rod Standard for Rotary Shoulder Connection, Box, NC #50
      RS-NC50-P Rod Standard for Rotary Shoulder Connection, Pin, NC #50
      RS-NC56-B Rod Standard for Rotary Shoulder Connection, Box, NC #56
      RS-NC56-P Rod Standard for Rotary Shoulder Connection, Pin, NC #56
      RS-NC61-B Rod Standard for Rotary Shoulder Connection, Box, NC #61
      RS-NC61-P Rod Standard for Rotary Shoulder Connection, Pin, NC #61
      RS-NC70-B Rod Standard for Rotary Shoulder Connection, Box, NC #70
      RS-NC70-P Rod Standard for Rotary Shoulder Connection, Pin, NC #70
      RS-NC77-B Rod Standard for Rotary Shoulder Connection, Box, NC #77
      RS-NC77-P Rod Standard for Rotary Shoulder Connection, Pin, NC #77
      RSTD-1050EUE-B Round Style Setting Standard-1.050” EUE 10 Round, Box
      RSTD-1050EUE-P   Round Style Setting Standard-1.050” EUE , 10 Round, Pin   
      RSTD-1050NUE-B Round Style Setting Standard-1.050” NUE , 10 Round, Box
      RSTD-1050NUE-P Round Style Setting Standard-1.050” NUE , 10 Round, Pin
      RSTD-1315EUE-B Round Style Setting Standard-1.315” EUE , 10 Round, Box
      RSTD-1315EUE-P Round Style Setting Standard-1.315” EUE , 10 Round, Pin
      RSTD-1315NUE-B  Round Style Setting Standard-1.315” NUE , 10 Round, Box
      RSTD-1315NUE-P Round Style Setting Standard-1.315” NUE , 10 Round, Pin
      RSTD-1660EUE-B Round Style Setting Standard-1.660” EUE , 10 Round, Box
      RSTD-1660EUE-P Round Style Setting Standard-1.660” EUE , 10 Round, Pin
      RSTD-1660NUE-B Round Style Setting Standard-1.660” NUE , 10 Round, Box
      RSTD-1660NUE-P Round Style Setting Standard-1.660” NUE , 10 Round, Pin
      RSTD-1900EUE-B     Round Style Setting Standard-1.900” EUE , 10 Round, Box   
      RSTD-1900EUE-P Round Style Setting Standard-1.900” EUE , 10 Round, Pin
      RSTD-1900NUE-B Round Style Setting Standard-1.900” NUE , 10 Round, Box
      RSTD-1900NUE-P  Round Style Setting Standard-1.900” NUE , 10 Round, Pin
      RSTD-238B-B         Round Style Setting Standard- 2?” Buttress, Box
      RSTD-238B-P        Round Style Setting Standard- 2?” Buttress, Pin
      RSTD-238E-B Round Style Setting Standard- 2?” EUE, Box
      RSTD-238E-B Round Style Setting Standard- 2?” EUE, Box
      RSTD-238E-P Round Style Setting Standard- 2?” EUE, Pin
      RSTD-238E-P Round Style Setting Standard- 2?” EUE, Pin
      RSTD-238L-B Round Style Setting Standard- 2?” 8R LTC, Box
      RSTD-238L-P Round Style Setting Standard- 2?” 8R LTC, Pin
      RSTD-238N-B Round Style Setting Standard- 2?” NUE, Box
      RSTD-238N-P Round Style Setting Standard- 2?” NUE, Pin
      RSTD-238S-B Round Style Setting Standard- 2?”8R STC, Box
      RSTD-238S-P Round Style Setting Standard- 2?” 8R STC, Pin
      RSTD-278B-B Round Style Setting Standard- 2?” Buttress, Box
      RSTD-278B-P Round Style Setting Standard- 2?” Buttress, Pin
      RSTD-278E-B Round Style Setting Standard- 2?” EUE, Box
      RSTD-278E-P Round Style Setting Standard- 2?” EUE, Pin
      RSTD-278L-B Round Style Setting Standard- 2?” 8R LTC, Box
      RSTD-278L-P Round Style Setting Standard- 2?” 8R LTC, Pin
      RSTD-278N-B Round Style Setting Standard- 2?” NUE, Box
      RSTD-278N-P Round Style Setting Standard- 2?” NUE, Pin
      RSTD-278S-B Round Style Setting Standard- 2?” 8R STC, Box
      RSTD-278S-P Round Style Setting Standard- 2?” 8R STC, Pin
      RSTD-312B-B Round Style Setting Standard- 3?” Buttress, Box
      RSTD-312B-P Round Style Setting Standard- 3?” Buttress, Pin
      RSTD-312E-B Round Style Setting Standard- 3?” EUE, Box
      RSTD-312E-P Round Style Setting Standard- 3?” EUE, Pin
      RSTD-312L-B Round Style Setting Standard- 3?” 8R LTC, Box
      RSTD-312L-P Round Style Setting Standard- 3?” 8R LTC, Pin
      RSTD-312N-B Round Style Setting Standard- 3?” NUE, Box
      RSTD-312N-P Round Style Setting Standard- 3?” NUE, Pin
      RSTD-312S-B Round Style Setting Standard- 3?” 8R STC, Box
      RSTD-312S-P Round Style Setting Standard- 3?” 8R STC, Pin
      RSTD-412B-B Round Style Setting Standard- 4?” Buttress, Box
      RSTD-412B-P Round Style Setting Standard- 4?” Buttress, Pin
      RSTD-412E-B Round Style Setting Standard- 4?” EUE, Box
      RSTD-412E-P Round Style Setting Standard- 4?” EUE, Pin
      RSTD-412L-B Round Style Setting Standard- 4?” 8R LTC, Box
      RSTD-412L-P Round Style Setting Standard- 4?” 8R LTC, Pin
      RSTD-412N-B Round Style Setting Standard- 4?” NUE, Box
      RSTD-412N-P Round Style Setting Standard- 4?” NUE, Pin
      RSTD-412S-9-B Round Style Setting Standard- 4?” - 9.50# 8R STC, Box
      RSTD-412S-9-P Round Style Setting Standard- 4?” - 9.50# 8R STC, Pin
      RSTD-412S-O-B Round Style Setting Standard- 4?” - Other 8R STC, Box
      RSTD-412S-O-P Round Style Setting Standard- 4?” - Other 8R STC, Pin
      RSTD-4B-B Round Style Setting Standard- 4" Buttress, Box
      RSTD-4B-P Round Style Setting Standard- 4” Buttress, Pin
      RSTD-4L-B Round Style Setting Standard- 4” 8R LTC, Box
      RSTD-4L-P Round Style Setting Standard- 4” 8R LTC, Pin
      RSTD-4S-B Round Style Setting Standard- 4” 8R STC, Box
      RSTD-4S-P Round Style Setting Standard- 4” 8R STC, Pin
      RSTD-512B-B Round Style Setting Standard- 5?” Buttress, Box
      RSTD-512B-P Round Style Setting Standard- 5?” Buttress, Pin
      RSTD-512L-B Round Style Setting Standard- 5?” 8R LTC, Box
      RSTD-512L-P Round Style Setting Standard- 5?” 8R LTC, Pin
      RSTD-512S-B Round Style Setting Standard- 5?” 8R STC, Box
      RSTD-512S-P Round Style Setting Standard- 5?” 8R STC, Pin
      RSTD-5B-B Round Style Setting Standard- 5” Buttress, Box
      RSTD-5B-P Round Style Setting Standard- 5” Buttress, Pin
      RSTD-5L-B Round Style Setting Standard- 5” 8R LTC, Box
      RSTD-5L-P Round Style Setting Standard- 5” 8R LTC, Pin
      RSTD-5S-11-B Round Style Setting Standard- 5” - 11.50# 8R STC, Box
      RSTD-5S-11-P Round Style Setting Standard- 5” - 11.50# 8R STC, Pin
      RSTD-5S-O-B Round Style Setting Standard- 5” - Other 8R STC, Box
      RSTD-5S-O-P Round Style Setting Standard- 5” - Other 8R STC, Pin
      RSTD-658B-B Round Style Setting Standard- 6?” Buttress, Box
      RSTD-658B-P Round Style Setting Standard- 6?” Buttress, Pin
      RSTD-658L-B Round Style Setting Standard- 6?” 8R LTC, Box
      RSTD-658L-P Round Style Setting Standard- 6?” 8R LTC, Pin
      RSTD-658S-B Round Style Setting Standard- 6?” 8R STC, Box
      RSTD-658S-P Round Style Setting Standard- 6?” 8R STC, Pin
      RSTD-7B-B Round Style Setting Standard- 7” Buttress, Box
      RSTD-7B-P Round Style Setting Standard- 7” Buttress, Pin
      RSTD-7L-B Round Style Setting Standard- 7” 8R LTC, Box
      RSTD-7L-P Round Style Setting Standard- 7” 8R LTC, Pin
      RSTD-7S-17-B Round Style Setting Standard- 7” - 17.00# 8R STC, Box
      RSTD-7S-17-P Round Style Setting Standard- 7” - 17.00# 8R STC, Pin
      RSTD-7S-O-B Round Style Setting Standard- 7” - Other 8R STC, Box
      RSTD-7S-O-P Round Style Setting Standard- 7” - Other 8R STC, Pin
      RSTD-NC10-B Round Style Setting Standard- RSC, NC #10, Box
      RSTD-NC10-P Round Style Setting Standard- RSC, NC #10, Pin
      RSTD-NC12-B Round Style Setting Standard- RSC, NC #12, Box
      RSTD-NC12-P Round Style Setting Standard- RSC, NC #12, Pin
      RSTD-NC13-B Round Style Setting Standard- RSC, NC #13, Box
      RSTD-NC13-P Round Style Setting Standard- RSC, NC #13, Pin
      RSTD-NC16-B Round Style Setting Standard- RSC, NC #16, Box
      RSTD-NC16-P Round Style Setting Standard- RSC, NC #16, Pin
      RSTD-NC23-B Round Style Setting Standard- RSC, NC #23, Box
      RSTD-NC23-P Round Style Setting Standard- RSC, NC #23, Pin
      RSTD-NC26-B Round Style Setting Standard- RSC, NC #26, Box
      RSTD-NC26-P Round Style Setting Standard- RSC, NC #26, Pin
      RSTD-NC31-B Round Style Setting Standard- RSC, NC #31, Box
      RSTD-NC31-P Round Style Setting Standard- RSC, NC #31, Pin
      RSTD-NC35-B Round Style Setting Standard- RSC, NC #35, Box
      RSTD-NC35-P Round Style Setting Standard- RSC, NC #35, Pin
      RSTD-NC38-B Round Style Setting Standard- RSC, NC #38, Box
      RSTD-NC38-P Round Style Setting Standard- RSC, NC #38, Pin
      RSTD-NC40-B Round Style Setting Standard- RSC, NC #40, Box
      RSTD-NC40-P Round Style Setting Standard- RSC, NC #40, Pin
      RSTD-NC44-B Round Style Setting Standard- RSC, NC #44, Box
      RSTD-NC44-P Round Style Setting Standard- RSC, NC #44, Pin
      RSTD-NC46-B Round Style Setting Standard- RSC, NC #46, Box
      RSTD-NC46-P Round Style Setting Standard- RSC, NC #46, Pin
      RSTD-NC50-B Round Style Setting Standard- RSC, NC #50, Box
      RSTD-NC50-P Round Style Setting Standard- RSC, NC #50, Pin
      RSTD-NC56-B Round Style Setting Standard- RSC, NC #56, Box
      RSTD-NC56-P Round Style Setting Standard- RSC, NC #56, Pin
      RSTD-NC61-B Round Style Setting Standard- RSC, NC #61, Box
      RSTD-NC61-P Round Style Setting Standard- RSC, NC #61, Pin
      RSTD-NC70-B Round Style Setting Standard- RSC, NC #70, Box
      RSTD-NC70-P Round Style Setting Standard- RSC, NC #70, Pin
      RSTD-NC77-B Round Style Setting Standard- RSC, NC #77, Box
      RSTD-NC77-P Round Style Setting Standard- RSC, NC #77, Pin
      S021 0.021” Dia. Contact Point
      S03125 0.03125” Dia. Contact Point
      S032 0.032” Dia. Contact Point
      S041 0.041” Dia. Contact Point
      S050 0.050” Dia. Contact Point
      S057 0.057” Dia. Contact Point
      S062 0.062” Dia. Contact Point
      S072 0.072” Dia. Contact Point
      S090 0.090” Dia. Contact Point
      S096 0.096” Dia. Contact Point
      S098 0.098” Dia. Contact Point
      S105T 0.105” Dia. Contact Point
      S115 0.115” Dia. Contact Point
      S125 0.125” Dia. Contact Point
      S128 0.128” Dia. Contact Point
      S144 0.144” Dia. Contact Point
      S156 0.156” Dia. Contact Point
      S188 0.188" Dia Contact Point
      S200 0.200” Dia. Contact Point
      S235 0.235” Dia. Contact Point
      S266 0.266” Dia. Contact Point
      S500 0.500” Dia. Contact Point
      SB-21.032 Special set bar for CBX-21.027. Apex diameter 21.0320”. Supplied with TF-BX 23° angle blocks.
      SB-2100 8” long extension shoe, 1.500” – 1.700”
      SB-2110 8” long extension shoe, 1.625” – 1.825”
      SB-2120 8” long extension shoe, 1.975” – 2.175”
      SB-2150 .130” riser, Requires SB-2200 extension shoe, 1.975” – 2.175”
      SB-2150A 20" Extension shoe assembly, 1.975” – 2.175”
      SB-2200 20” extension shoe, requires an SB-riser
      SB-2300 .280” riser, Requires SB-2200 extension shoe, 2.125” – 2.325”
      SB-2300A 20" Extension shoe assembly, 2.125” – 2.325”
      SB-2400 .380” riser, Requires SB-2200 extension shoe, 2.250” – 2.450”
      SB-2400A 20" Extension shoe assembly, 2.250” – 2.450”
      SB-2500 .480” rise, Requires SB-2200 extension shoe, 2.350” – 2.550”
      SB-2500A 20" Extension shoe assembly, 2.350” – 2.550”
      SB-2600 .580” riser, Requires SB-2200 extension shoe, 2.450” – 2.650”
      SB-2600A 20" Extension shoe assembly, 2.450” – 2.650”
      SB-3500 20” extension shoe w/ brackets and adapter, 2.500” – 3.550”
      SB-4500 20” extension shoe w/ brackets and adapter, 3.250” – 4.450”
      SB-5500 20” extension shoe w/ brackets and adapter, 4.350” – 5.500”
      SB-6500 20” extension shoe w/ brackets and adapter, 5.350” – 6.550”
      SB-7500 20” extension shoe w/ brackets and adapter, 6.350” – 7.5500”
      SB-ADAPTER Bracket & Adapter for SB-3500, SB-4500, and SB-5500, per drawing 3-0-587
      SBFS-1600 Flat Setting Standard, SBG, 1.600"
      SBFS-1727 Flat Setting Standard, SBG, 1.727”
      SBFS-1800 Flat Setting Standard, SBG, 1.800”
      SBFS-2062 Flat Setting Standard, SBG, 2.062”
      SBFS-2187 Flat Setting Standard, SBG, 2.187”
      SBFS-2312 Flat Setting Standard, SBG, 2.312”
      SBFS-2325 Flat Setting Standard, SBG, 2.325”
      SBFS-2375 Flat Setting Standard, SBG, 2.375"
      SBFS-2437 Flat Setting Standard, SBG, 2.437”
      SBFS-2540 Flat Setting Standard, SBG, 2.540”
      SBFS-2598 Flat Setting Standard, SBG, 2.598” 
      SBFS-2680 Flat Setting Standard, SBG, 2.680” 
      SBFS-2700 Flat Setting Standard, SBG, 2.700”
      SBFS-2720 Flat Setting Standard, SBG, 2.720” 
      SBFS-2736 Flat Setting Standard, SBG, 2.736”
      SBFS-2900 Flat Setting Standard, SBG, 2.900”
      SBFS-2980 Flat Setting Standard, SBG, 2.980”
      SBFS-3080 Flat Setting Standard, SBG, 3.080”
      SBFS-3150 Flat Setting Standard, SBG, 3.150” 
      SBFS-3175 Flat Setting Standard, SBG, 3.175” 
      SBFS-3245 Flat Setting Standard, SBG, 3.245”
      SBFS-3260 Flat Setting Standard, SBG, 3.260”
      SBFS-3303 Flat Setting Standard, SBG, 3.303” 
      SBFS-3400 Flat Setting Standard, SBG, 3.400”
      SBFS-3425 Flat Setting Standard, SBG, 3.425”
      SBFS-3440 Flat Setting Standard, SBG, 3.440”
      SBFS-3488 Flat Setting Standard, SBG, 3.488”
      SBFS-3500 Flat Setting Standard, SBG, 3.500”
      SBFS-3592 Flat Setting Standard, SBG, 3.592”
      SBFS-3620 Flat Setting Standard, SBG, 3.620”
      SBFS-3625 Flat Setting Standard, SBG, 3.625”
      SBFS-3750 Flat Setting Standard, SBG, 3.750”
      SBFS-3795 Flat Setting Standard, SBG, 3.795”
      SBFS-3800 Flat Setting Standard, SBG, 3.800”
      SBFS-3805 Flat Setting Standard, SBG, 3.805”
      SBFS-3885 Flat Setting Standard, SBG, 3.885”
      SBFS-3900 Flat Setting Standard, SBG, 3.900" 
      SBFS-3976 Flat Setting Standard, SBG, 3.976”
      SBFS-3980 Flat Setting Standard, SBG, 3.980”
      SBFS-3985 Flat Setting Standard, SBG, 3.985”
      SBFS-4000 Flat Setting Standard, SBG, 4.000”
      SBFS-4160 Flat Setting Standard, SBG, 4.160”
      SBFS-4165 Flat Setting Standard, SBG, 4.165”
      SBFS-4250 Flat Setting Standard, SBG, 4.250”
      SBFS-4343 Flat Setting Standard, SBG, 4.343”
      SBFS-4346 Flat Setting Standard, SBG, 4.346”
      SBFS-4370 Flat Setting Standard, SBG, 4.370” 
      SBFS-4394 Flat Setting Standard, SBG, 4.394”
      SBFS-4520 Flat Setting Standard, SBG, 4.520”
      SBFS-4526 Flat Setting Standard, SBG, 4.526”
      SBFS-4538 Flat Setting Standard, SBG, 4.538”
      SBFS-4567 Flat Setting Standard, SBG, 4.567”
      SBFS-4576 Flat Setting Standard, SBG, 4.576"
      SBFS-4585 Flat Setting Standard, SBG, 4.585”
      SBFS-4609 Flat Setting Standard, SBG, 4.609”
      SBFS-4640 Flat Setting Standard, SBG, 4.640”
      SBFS-4700 Flat Setting Standard, SBG, 4.700”
      SBFS-4706 Flat Setting Standard, SBG, 4.706”
      SBFS-4750 Flat Setting Standard, SBG, 4.750”
      SBFS-4800 Flat Setting Standard, SBG, 4.800”
      SBFS-4880 Flat Setting Standard, SBG, 4.880”
      SBFS-4886 Flat Setting Standard, SBG, 4.886”
      SBFS-4890 Flat Setting Standard, SBG, 4.890”
      SBFS-4900 Flat Setting Standard, SBG, 4.900”
      SBFS-5025 Flat Setting Standard, SBG, 5.025”
      SBFS-5060 Flat Setting Standard, SBG, 5.060”
      SBFS-5150 Flat Setting Standard, SBG, 5.150”
      SBFS-5240 Flat Setting Standard, SBG, 5.240”
      SBFS-5314 Flat Setting Standard, SBG, 5.314”
      SBFS-5350 Flat Setting Standard, SBG, 5.350”
      SBFS-5420 Flat Setting Standard, SBG, 5.420”
      SBFS-5500 Flat Setting Standard, SBG, 5.500” 
      SBFS-5600 Flat Setting Standard, SBG, 5.600”
      SBFS-5750 Flat Setting Standard, SBG, 5.750”
      SBFS-5780 Flat Setting Standard, SBG, 5.780”
      SBFS-5850 Flat Setting Standard, SBG, 5.850”
      SBFS-5960 Flat Setting Standard, SBG, 5.960”
      SBFS-6050 Flat Setting Standard, SBG, 6.050”
      SBFS-6140 Flat Setting Standard, SBG, 6.140”
      SBFS-6250 Flat Setting Standard, SBG, 6.250”
      SBFS-6320 Flat Setting Standard, SBG, 6.320”
      SBFS-6375 Flat Setting Standard, SBG, 6.375”
      SBFS-6500 Flat Setting Standard, SBG, 6.500”
      SBFS-6600 Flat Setting Standard, SBG, 6.600”
      SBFS-6680 Flat Setting Standard, SBG, 6.680”
      SBFS-6750 Flat Setting Standard, SBG, 6.750”
      SBFS-6860 Flat Setting Standard, SBG, 6.860”
      SBFS-7040 Flat Setting Standard, SBG, 7.040”
      SBFS-7220 Flat Setting Standard, SBG, 7.220”
      SBFS-7375 Flat Setting Standard, SBG, 7.375”
      SBFS-7450 Flat Setting Standard, SBG, 7.450”
      SBG-0100E Electronic Stator Bore Package w/ CPU, 6 Shoes, and Standards, Range: 2.025"-6.80"
      SBG-0100E-10FT Special 10' Wand Only, accuracy of +/- 0.003”
      SBG-0100E-12FT Special 12' Wand Only, accuracy of +/- 0.003” 
      SBG-0100E-6FT Wand Only for SBG-0100E, 6FT
      SBG-0100E-8FT Special 8' Wand Only, accuracy of +/- 0.003”
      SBG-034 SBG Setting Standard Base Plate
      SBG-035 SBG Setting Standard Top Plate
      SBG-037 SBG Setting Standard Threaded Rod
      SBG13-2200 SBG-0100E 13" Gage Extension Assembly, range 2.200"-2.475"
      SBG13-2325 SBG-0100E 13" Gage Extension Assembly, range 2.325"-2.600"
      SBG13-2580 SBG-0100E 13" Gage Extension Assembly, range 2.580"-2.855"
      SBG13-2825 SBG-0100E 13" Gage Extension Assembly, range 2.825"-3.100"
      SBG13-3000 SBG-0100E 13" Gage Extension Assembly, range 3.000"-3.275"
      SBG13-3175 SBG-0100E 13" Gage Extension Assembly, range 3.175"-3.450"
      SBG13-3425 SBG-0100E 13" Gage Extension Assembly, range 3.425"-3.700"
      SBG13-3585 SBG-0100E 13" Gage Extension Assembly, range 3.585"-3.860" 
      SBG13-3795 SBG-0100E 13" Gage Extension Assembly, range 3.795"-4.070"
      SBG13-4125 SBG-0100E 13" Gage Extension Assembly, range 4.125"-4.400"
      SBG13-4375 SBG-0100E 13" Gage Extension Assembly, range 4.375"-4.650"
      SBG13-4585 SBG-0100E 13" Gage Extension Assembly, range 4.585"-4.860"
      SBG13-4800 SBG-0100E 13" Gage Extension Assembly, range 4.800"-5.075"
      SBG13-5025 SBG-0100E 13" Gage Extension Assembly, range 5.025"-5.300"
      SBG13-5200 SBG-0100E 13" Gage Extension Assembly, range 5.200"-5.475"
      SBG13-5275 SBG-0100E 13" Gage Extension Assembly, range 5.275"-5.550"
      SBG13-5425 SBG-0100E 13" Gage Extension Assembly, range 5.425"-5.700"
      SBG13-5625 SBG-0100E 13" Gage Extension Assembly, range 5.625"-5.900"
      SBG13-5925 SBG-0100E 13" Gage Extension Assembly, range 5.925"-6.200"
      SBG13-6125 SBG-0100E 13" Gage Extension Assembly, range 6.125"-6.400"
      SBG13-6350 SBG-0100E 13" Gage Extension Assembly, range 6.350"-6.625"
      SBG13-6525 SBG-0100E 13" Gage Extension Assembly, range 6.525"-6.800"
      SBG20-2200 SBG-0100E 20" Gage Extension Assembly, range 2.200"-2.475"
      SBG20-2325 SBG-0100E 20" Gage Extension Assembly, range 2.325"-2.600"
      SBG20-2580 SBG-0100E 20" Gage Extension Assembly, range 2.580"-2.855"
      SBG20-2825 SBG-0100E 20" Gage Extension Assembly, range 2.825"-3.100"
      SBG20-3000 SBG-0100E 20" Gage Extension Assembly, range 3.000"-3.275"
      SBG20-3175 SBG-0100E 20" Gage Extension Assembly, range 3.175"-3.450"
      SBG20-3425 SBG-0100E 20" Gage Extension Assembly, range 3.425"-3.700"
      SBG20-3585 SBG-0100E 20" Gage Extension Assembly, range 3.585"-3.860"
      SBG20-3795 SBG-0100E 20" Gage Extension Assembly, range 3.795"-4.070" 
      SBG20-4125 SBG-0100E 20" Gage Extension Assembly, range 4.125"-4.400"
      SBG20-4375 SBG-0100E 20" Gage Extension Assembly, range 4.375"-4.650"
      SBG20-4585 SBG-0100E 20" Gage Extension Assembly, range 4.585"-4.860"
      SBG20-4800 SBG-0100E 20" Gage Extension Assembly, range 4.800"-5.075"
      SBG20-5025 SBG-0100E 20" Gage Extension Assembly, range 5.025"-5.300"
      SBG20-5200 SBG-0100E 20" Gage Extension Assembly, range 5.200"-5.475"
      SBG20-5275 SBG-0100E 20" Gage Extension Assembly, range 5.275"-5.550"
      SBG20-5425 SBG-0100E 20" Gage Extension Assembly, range 5.425"-5.700"
      SBG20-5625 SBG-0100E 20" Gage Extension Assembly, range 5.625"-5.900"
      SBG20-5925 SBG-0100E 20" Gage Extension Assembly, range 5.925"-6.200"
      SBG20-6125 SBG-0100E 20" Gage Extension Assembly, range 6.125"-6.400"
      SBG20-6350 SBG-0100E 20" Gage Extension Assembly, range 6.350"-6.625"
      SBG20-6525 SBG-0100E 20" Gage Extension Assembly, range 6.525"-6.800"
      SBG28-2200 SBG-0100E 28" Gage Extension Assembly, range 2.200"-2.475"
      SBG28-2325 SBG-0100E 28" Gage Extension Assembly, range 2.325"-2.600"
      SBG28-2580 SBG-0100E 28" Gage Extension Assembly, range 2.580"-2.855"
      SBG28-2825 SBG-0100E 28" Gage Extension Assembly, range 2.825"-3.100"
      SBG28-3000 SBG-0100E 28" Gage Extension Assembly, range 3.000"-3.275"
      SBG28-3175 SBG-0100E 28" Gage Extension Assembly, range 3.175"-3.450"
      SBG28-3425 SBG-0100E 28" Gage Extension Assembly, range 3.425"-3.700"
      SBG28-3585 SBG-0100E 28" Gage Extension Assembly, range 3.585"-3.860"
      SBG28-3795 SBG-0100E 28" Gage Extension Assembly, range 3.795"-4.070" 
      SBG28-4125 SBG-0100E 28" Gage Extension Assembly, range 4.125"-4.400"
      SBG28-4375 SBG-0100E 28" Gage Extension Assembly, range 4.375"-4.650"
      SBG28-4585 SBG-0100E 28" Gage Extension Assembly, range 4.585"-4.860"
      SBG28-4800 SBG-0100E 28" Gage Extension Assembly, range 4.800"-5.075"
      SBG28-5025 SBG-0100E 28" Gage Extension Assembly, range 5.025"-5.300"
      SBG28-5200 SBG-0100E 28" Gage Extension Assembly, range 5.200"-5.475"
      SBG28-5275 SBG-0100E 28" Gage Extension Assembly, range 5.275"-5.550"
      SBG28-5425 SBG-0100E 28" Gage Extension Assembly, range 5.425"-5.700"
      SBG28-5625 SBG-0100E 28" Gage Extension Assembly, range 5.625"-5.900"
      SBG28-5925 SBG-0100E 28" Gage Extension Assembly, range 5.925"-6.200"
      SBG28-6125 SBG-0100E 28" Gage Extension Assembly, range 6.125"-6.400"
      SBG28-6350 SBG-0100E 28" Gage Extension Assembly, range 6.350"-6.625"
      SBG28-6525 SBG-0100E 28" Gage Extension Assembly, range 6.525"-6.800"
      SBG-5000A Stator bore gage, Range 1.500" -2.000", Analog Indicator, Head Length 8.350".  Includes 3 gage shoes
      SBG-5000D Stator bore gage, Range 1.500"-1.650",  Head Length 8.350"
      SBG-5000E Stator bore gage, Range 1.500"-1.650", Cabled remote DRO, Head Length 8.350"
      SBG-5021D Digital Indicator Stator Bore Gage- Special 21" Head Length
      SBG-5021E Electronic Stator Bore Gage- Special 21" Head Length
      SBG-FSA flat setting stanard assembly includes base plate, top plate, threaded rod, and speed nut. Dwg # 3-0-449
      SBG-GIB Interface box w/ computer.  Includes SBG Software for data collection
      SBG-NUT Speed nut
      SBRS-0805 Round Setting Standard, SBG, 0.805”
      SBRS-0915 Round Setting Standard, SBG, 0.915”
      SBRS-0980 Round Setting Standard, SBG, 0.980”
      SBRS-1025 Round Setting Standard, SBG, 1.025”
      SBRS-1094 Round Setting Standard, SBG, 1.094”
      SBRS-1135 Round Setting Standard, SBG, 1.135”
      SBRS-1245 Round Setting Standard, SBG, 1.245”
      SBRS-1280 Round Setting Standard, SBG, 1.280”
      SBRS-1355 Round Setting Standard, SBG, 1.355”
      SBRS-1465 Round Setting Standard, SBG, 1.465”
      SBRS-1562 Round Setting Standard, SBG, 1.562”
      SBRS-1575 Round Setting Standard, SBG, 1.575”
      SBRS-1687 Round Setting Standard, SBG, 1.687”
      SBRS-1812 Round Setting Standard, SBG, 1.812”
      SBRS-1925 Round Setting Standard, SBG, 1.925”
      SBRS-1937 Round Setting Standard, SBG, 1.937”
      SBRS-1960 Round Setting Standard, SBG, 1.960”
      SBRS-2062 Round Setting Standard, SBG, 2.062”
      SBRS-2187 Round Setting Standard, SBG, 2.187”
      SBRS-2312 Round Setting Standard, SBG, 2.312”
      SBRS-2437 Round Setting Standard, SBG, 2.437"
      SBRS-2540 Round Setting Standard, SBG, 2.540”
      SBRS-2720 Round Setting Standard, SBG, 2.720”
      SBRS-2736 Round Setting Standard, SBG, 2.736”
      SBRS-2900 Round Setting Standard, SBG, 2.900”
      SBRS-2980 Round Setting Standard, SBG, 2.980”
      SBRS-3080 Round Setting Standard, SBG, 3.080”
      SBRS-3245 Round Setting Standard, SBG, 3.245”
      SBRS-3260 Round Setting Standard, SBG, 3.260”
      SBRS-3425 Round Setting Standard, SBG, 3.425”
      SBRS-3440 Round Setting Standard, SBG, 3.440”
      SBRS-3488 Round Setting Standard, SBG, 3.488”
      SBRS-3592 Round Setting Standard, SBG, 3.592”
      SBRS-3620 Round Setting Standard, SBG, 3.620”
      SBRS-3625 Round Setting Standard, SBG, 3.625”
      SBRS-3750 Round Setting Standard, SBG, 3.750”
      SBRS-3800 Round Setting Standard, SBG, 3.800”
      SBRS-3805 Round Setting Standard, SBG, 3.805”
      SBRS-3885 Round Setting Standard, SBG, 3.885”
      SBRS-3976 Round Setting Standard, SBG, 3.976”
      SBRS-3980 Round Setting Standard, SBG, 3.980”
      SBRS-3985 Round Setting Standard, SBG, 3.985”
      SBRS-4160 Round Setting Standard, SBG, 4.160”
      SBRS-4165 Round Setting Standard, SBG, 4.165”
      SBRS-4343 Round Setting Standard, SBG, 4.343”
      SBRS-4346 Round Setting Standard, SBG, 4.346”
      SBRS-4394 Round Setting Standard, SBG, 4.343”
      SBRS-4520 Round Setting Standard, SBG, 4.520”
      SBRS-4526 Round Setting Standard, SBG, 4.526”
      SBRS-4538 Round Setting Standard, SBG, 4.538”
      SBRS-4609 Round Setting Standard, SBG, 4.609”
      SBRS-4700 Round Setting Standard, SBG, 4.700”
      SBRS-4706 Round Setting Standard, SBG, 4.706”
      SBRS-4800 Round Setting Standard, SBG, 4.800”
      SBRS-4880 Round Setting Standard, SBG, 4.880”
      SBRS-4886 Round Setting Standard, SBG, 4.886”
      SBRS-4890 Round Setting Standard, SBG, 4.890”
      SBRS-5060 Round Setting Standard, SBG, 5.060”
      SBRS-5240 Round Setting Standard, SBG, 5.240”
      SBRS-5314 Round Setting Standard, SBG, 5.314”
      SBRS-5420 Round Setting Standard, SBG, 5.420”
      SBRS-5600 Round Setting Standard, SBG, 5.600”
      SBRS-5780 Round Setting Standard, SBG, 5.780”
      SBRS-5960 Round Setting Standard, SBG, 5.960”
      SBRS-6140 Round Setting Standard, SBG, 6.140”
      SBRS-6320 Round Setting Standard, SBG, 6.320”
      SBRS-6500 Round Setting Standard, SBG, 6.500”
      SBRS-6680 Round Setting Standard, SBG, 6.680”
      SBRS-6860 Round Setting Standard, SBG, 6.860”
      SBRS-7040 Round Setting Standard, SBG, 7.040”
      SBRS-7220 Round Setting Standard, SBG, 7.220”
      SCREW-1032BT #10-32x3/8" Brass Tipped set screw
      SCREW-1420BT 1/4"-20x3/8" Brass Tipped set screw
      SE-1000 Straight Edge
      SES-1000 Replacement Straight Edge Standard
      SG-8001 Saddle Gage
      SG-8001-BB Brass Bushing
      SG-8001-TA SG-8001 Tube Assembly
      SG-8001-TB Transfer Beam
      SL-H90 Thread Height Standard, SL-H90, 1.25 TPF, 3 TPI to be used with T072 pt.
      SP-032 SPG-6000 Pitch Diameter Contact Point, 18 - 20 pitch/1 - 1.25mm pitch
      SP-032T SPG-6000 Pitch Diameter Contact Point, 16 pitch, Truncated
      SP-041 SPG-6000 Pitch Diameter Contact Point, 13 -16 pitch/1.5 - 2mm pitch
      SP-041T SPG-6000 Pitch Diameter Contact Point, 12 - 14 pitch, Truncated
      SP-050 SPG-6000 Pitch Diameter Contact Point, 11.5 - 12 pitch
      SP-050T SPG-6000Pitch Diameter Contact Point, 10 pitch, Truncated
      SP-057 SPG-6000 Pitch Diameter Contact Point, 10 pitch/2.5mm pitch
      SP-062T SPG-6000 Pitch Diameter Contact Point, 8 pitch, Truncated
      SP-072 SPG-6000 Pitch Diameter Contact Point, 8 - 9 pitch/3.5 - 3mm pitch
      SP-090T SPG-6000 Pitch Diameter Contact Point, 6 pitch, Truncated
      SP-096 SPG-6000 Pitch Diameter Contact Point, 6 - 7 pitch/4 - 4.25mm pitch
      SP-105 SPG-6000 Pitch Diameter Contact Point, 5 pitch/4.5 - 4.75mm pitch
      SP-105T SPG-6000 Pitch Diameter Contact Point, 5 pitch, Truncated
      SPA-265 SPG-6000 Pitch Diameter Contact Point Arms, .265” dia., 1” long
      SPA-375 SPG-6000 Pitch Diameter Contact Point Arms,.375” dia., 1.25” long
      SPA-437 SPG-6000 Pitch Diameter Contact Point Arms,.437” dia., 1.50” long
      Spec Long Form Cert Special Long Form Certificates
      SPG-6000 Internal Thread Roll/Pitch Diameter Gage 5/8” to 1?”
      SPG-Handle Handles for SPG-6000, 1 set of 2
      SQ-1630 Squareness Gage, 36" total length of main "H" bar
      SQ-1630HB Main "H" bar only for the SQ-1630
      SQ-1636 Squareness Gage, 42" total length of main "H" bar
      SQ-1636HB Main "H" bar only for the SQ-1636
      SQ-PT-SLIDE Squareness Gage point slider
      SRA-10P SPG-6000 ACME Thread Rolls, 10 pitch
      SRA-11P SPG-6000 ACME Thread Rolls, 11 pitch
      SRA-12P SPG-6000 ACME Thread Rolls, 12 pitch
      SRA-13P SPG-6000 ACME Thread Rolls, 13 pitch
      SRA-14P SPG-6000 ACME Thread Rolls, 14 pitch
      SRA-16P SPG-6000 ACME Thread Rolls, 16 pitch
      SRA-18P SPG-6000 ACME Thread Rolls, 18 pitch
      SRA-4P SPG-6000 ACME Thread Rolls, 4 pitch
      SRA-5P SPG-6000 ACME Thread Rolls, 5 pitch
      SRA-6P SPG-6000 ACME Thread Rolls, 6 pitch
      SRA-7P SPG-6000 ACME Thread Rolls, 7 pitch
      SRA-8P SPG-6000 ACME Thread Rolls, 8 pitch
      SRA-9P SPG-6000 ACME Thread Rolls, 9 pitch
      SRMI-15P SPG-6000 ISO Metric Thread Rolls, 1.5mm pitch
      SRMI-175P SPG-6000 ISO Metric Thread Rolls, 1.75mm pitch
      SRMI-1P SPG-6000 ISO Metric Thread Rolls, 1mm pitch
      SRMI-25P SPG-6000 ISO Metric Thread Rolls, 2.5mm pitch
      SRMI-2P SPG-6000 ISO Metric Thread Rolls, 2mm pitch
      SRMI-35P SPG-6000 ISO Metric Thread Rolls, 3.5mm pitch
      SRMI-3P SPG-6000 ISO Metric Thread Rolls, 3mm pitch
      SRMI-4P SPG-6000 ISO Metric Thread Rolls, 4mm pitch
      SRSA-10P SPG-6000 Stub ACME Thread Rolls, 10 pitch
      SRSA-11P SPG-6000 Stub ACME Thread Rolls, 11 pitch
      SRSA-12P SPG-6000 Stub ACME Thread Rolls, 12 pitch
      SRSA-13P SPG-6000 Stub ACME Thread Rolls, 13 pitch
      SRSA-14P SPG-6000 Stub ACME Thread Rolls, 14 pitch
      SRSA-16P SPG-6000 Stub ACME Thread Rolls, 16 pitch
      SRSA-18P SPG-6000 Stub ACME Thread Rolls, 18 pitch
      SRSA-4P SPG-6000 Stub ACME Thread Rolls, 4 pitch
      SRSA-6P SPG-6000 Stub ACME Thread Rolls, 6 pitch
      SRSA-7P SPG-6000 Stub ACME Thread Rolls, 7 pitch
      SRSA-8P SPG-6000 Stub ACME Thread Rolls, 8 pitch
      SRSA-9P SPG-6000 Stub ACME Thread Rolls, 9 pitch
      SRVE-10P SPG-6000 UN Series Thread Rolls, 10 pitch external 60° “V”
      SRVE-11P SPG-6000 UN Series Thread Rolls, 11 pitch external 60° “V”
      SRVE-12P SPG-6000 UN Series Thread Rolls, 12 pitch external 60° “V”
      SRVE-13P SPG-6000 UN Series Thread Rolls, 13 pitch external 60° “V”
      SRVE-14P SPG-6000 UN Series Thread Rolls, 14 pitch external 60° “V”
      SRVE-16P SPG-6000 UN Series Thread Rolls, 16 pitch external 60° “V”
      SRVE-18P SPG-6000 UN Series Thread Rolls, 18 pitch external 60° “V”
      SRVE-20P SPG-6000 UN Series Thread Rolls, 20 pitch external 60° “V”
      SRVE-28P SPG-6000 UN Series Thread Rolls, 28 pitch external 60° “V”
      SRVE-5P SPG-6000 UN Series Thread Rolls, 5 pitch external 60° “V”
      SRVE-6P SPG-6000 UN Series Thread Rolls, 6 pitch external 60° “V”
      SRVE-8P SPG-6000 UN Series Thread Rolls, 8 pitch external 60° “V”
      SRVI-10P SPG-6000 UN Series Thread Rolls, 10 pitch internal 60° “V”
      SRVI-11P SPG-6000 UN Series Thread Rolls, 11 pitch internal 60° “V”
      SRVI-12P SPG-6000 UN Series Thread Rolls, 12 pitch internal 60° “V”
      SRVI-13P SPG-6000 UN Series Thread Rolls, 13 pitch internal 60° “V”
      SRVI-14P SPG-6000 UN Series Thread Rolls, 14 pitch internal 60° “V”
      SRVI-16P SPG-6000 UN Series Thread Rolls, 16 pitch internal 60° “V”
      SRVI-18P SPG-6000 UN Series Thread Rolls, 18 pitch internal 60° “V”
      SRVI-20P SPG-6000 UN Series Thread Rolls, 20 pitch internal 60° “V”
      SRVI-24P SPG-6000 UN Series Thread Rolls, 24 pitch internal 60° “V”
      SRVI-28P SPG-6000 UN Series Thread Rolls, 28 pitch internal 60° “V”
      SRVI-32P SPG-6000 UN Series Thread Rolls, 32 pitch internal 60° “V”
      SRVI-6P SPG-6000 UN Series Thread Rolls, 6 pitch internal 60° “V”
      SRVI-7P SPG-6000 UN Series Thread Rolls, 7 pitch internal 60° “V”
      SRVI-8P SPG-6000 UN Series Thread Rolls, 8 pitch internal 60° “V”
      SRVI-9P SPG-6000 UN Series Thread Rolls, 9 pitch internal 60° “V”
      SSB-1055 Extension Shoe, .980” - 1.105”
      SSB-1160 Extension Shoe, 1.085” – 1.210”
      SSB-1265 Extension Shoe, 1.190” – 1.315”
      SSB-1370 Extension Shoe, 1.295” – 1.420”
      SSB-1475 Extension Shoe, 1.400” – 1.525”
      SSB-1580 Extension Shoe, 1.505” – 1.630”
      SSB-1685 Extension Shoe, 1.610” – 1.735”
      SSB-1790 Extension Shoe, 1.715” – 1.840”
      SSB-1895 Extension Shoe, 1.820” – 1.945”
      SSB-2000 Extension Shoe, 1.925” – 2.050”
      SSB-950 Extension Shoe, .875” - 1.000”
      SSTD-B-BTC1 Box/Coupling Thread Size Standard for 4 1/2" - 7 5/8" Buttress Casing
      SSTD-B-BTC2 Box/Coupling Thread Size Standard for 8 5/8" - 13 3/8" Buttress Casing
      SSTD-B-EUE Box/Coupling Thread Size Standard for 2 3/8" - 4 1/2" EUE
      SSTD-B-LP Box/Coupling Thread Size Standard for 2 1/2" - 10" Line Pipe
      SSTD-B-LTC Box/Coupling Thread Size Standard for 4 1/2" - 9 5/8 LTC Casing
      SSTD-B-NUE Box/Coupling Thread Size Standard for 2 3/8" - 4 1/2" NUE
      SSTD-B-STC1 Box/Coupling Thread Size Standard for 4 1/2"- 7" STD Casing
      SSTD-B-STC2 Box/Coupling Thread Size Standard for 7 5/8" - 9 5/8" STC Casing
      SSTD-B-STC3 Box/Coupling Thread Size Standard for 10 3/4" - 13 3/8" STC Casing
      SSTD-P-BTC1 Pin Thread Size Standard for 4 1/2" - 7 5/8" Buttress Casing
      SSTD-P-BTC2 Pin Thread Size Standard for 8 5/8" - 13 3/8" Buttress Casing
      SSTD-P-EUE Pin Thread Size Standard for 2 3/8" - 4 1/2" EUE
      SSTD-P-LP Pin Thread Size Standard for 2 1/2" - 10" Line Pipe
      SSTD-P-LTC Pin Thread Size Standard for 4 1/2" - 9 5/8 LTC Casing
      SSTD-P-NUE Pin Thread Size Standard for 2 3/8" - 4 1/2" NUE
      SSTD-P-STC1 Pin Thread Size Standard for 4 1/2"- 6 5/8 STD Casing
      SSTD-P-STC2 Pin Thread Size Standard for 7" - 8 5/8" STC Casing
      SSTD-P-STC3 Pin Thread Size Standard for 10 3/4" - 13 3/8" STC Casing
      ST-7001 Standoff Gage w/ indicator and Setting Standard, .615” - .635”
      ST-7002 RSC Standoff Gage to measure plug stand-in, .0005"resolution, 0" - .01" stand-in
      Stator Bore Gage Calibration (all models)
      STD-CR SBG Gage Round Setting Standard Cradle
      STPA-375 Threaded contact point arms, .375” Diameter, 1.25” Long , MIn. Bore 1.032”
      STPA-437 Threaded contact point arms, .437” Diameter, 1.50” Long, MIn. Bore 1.152”
      STS-7001 Setting Standard Replacement, .625” width
      T021 0.021” Dia. Contact Point
      T028 0.028” Dia. Contact Point
      T032 0.032” Dia. Contact Point
      T032T 0.032” Dia. Contact Point, Truncated
      T034 0.034” Dia. Contact Point
      T041 0.041” Dia. Contact Point


      Gagemaker单项仪型号,规格全,欢迎前来咨询。
      QQ客服
      点击这里给我发消息  
      网赚平台代打 371| 209| 808| 448| 397| 715| 120| 234| 119| 871| 309| 976| 953| 122| 106| 333| 501| 801| 312| 435| 387| 359| 890| 823| 513| 643| 898| 430| 370| 894| 598| 630| 734| 714| 175| 63| 116| 570| 12| 664| 481|